where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GB Inspection Systems Ltd.
A leading UK manufacturer of Ultrasonic Probes, Accessories, Supplier of NDT Equipment and more.
718 views
Technical Discussions
S S Ananthan
Consultant,
RAA Tech Solutions, India, Joined Jun 2000, 36

S S Ananthan

Consultant,
RAA Tech Solutions,
India,
Joined Jun 2000
36
01:19 Mar-06-2006
RT of thin sheet welds

Hello,

I have been asked to take radiographs of thin sheet SS welds - 0.5 mm and above. Is there any requirement for RT of such a low thickness ? Will not a hydrotest adn PT be sufficiient for this purpose ?

Is there any standard for RT of such thin sheets ? What would be the possible sensitivity acheivable in X rays ?

S S Ananthan


 
 Reply 
 
Fred
Fred
02:47 Mar-06-2006
Re: RT of thin sheet welds
----------- Start Original Message -----------
: Hello,
: I have been asked to take radiographs of thin sheet SS welds - 0.5 mm and above. Is there any requirement for RT of such a low thickness ? Will not a hydrotest adn PT be sufficiient for this purpose ?
: Is there any standard for RT of such thin sheets ? What would be the possible sensitivity acheivable in X rays ?
: S S Ananthan
------------ End Original Message ------------

What would you use for penetrameters?



 
 Reply 
 
S S Ananthan
Consultant,
RAA Tech Solutions, India, Joined Jun 2000, 36

S S Ananthan

Consultant,
RAA Tech Solutions,
India,
Joined Jun 2000
36
00:08 Mar-16-2006
Re: RT of thin sheet welds
----------- Start Original Message -----------
: : Hello,
: : I have been asked to take radiographs of thin sheet SS welds - 0.5 mm and above. Is there any requirement for RT of such a low thickness ? Will not a hydrotest adn PT be sufficiient for this purpose ?
: : Is there any standard for RT of such thin sheets ? What would be the possible sensitivity acheivable in X rays ?
: : S S Ananthan
: What would you use for penetrameters?
------------ End Original Message ------------

We can use wire penetrameters - whatever is the minimum diameter available. The sensitiuvity will not be definitely 2% but at least some testing is possible .
My question : 1) Is RT required ? 2) Is any standard available for such requirements?


S S Ananthan





 
 Reply 
 
Jaromir A. Masa, PhD
Jaromir A. Masa, PhD
00:05 Mar-17-2006
Re: RT of thin sheet welds

The main question is, why they require x-ray testing. What will flow inside? And how the tin sheet weld seam will be stressed. I remember, in chemical industry, the tubes with liquid ethylene were 100% x-rayed. Stress was in cryogenic temperatures. When you speak about hydro a pressure testing, it is clear, it concerns low-dia tubes. Another question are the dimensions of allowable flaws.

Jaromir Amadeus Masa
Starmans Electronics Ltd
Prague



 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window