where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
889 views
Technical Discussions
Azhar Jamil
Engineering, NDT Mechanical Engineer
Pakistan, Joined Feb 2005, 3

Azhar Jamil

Engineering, NDT Mechanical Engineer
Pakistan,
Joined Feb 2005
3
07:58 May-26-2006
Re-calibration of EMCOL 6K Portable Current Flow Magnetic Particle Inspection Unit


We are using the Current Flow Magnetic Particle Inspection Unit. Its re-calibration is overdue and we want to re-calibrate it. Can anyone guide me how to re-calibrate (in-house) or help me in developing the re-calibration procedure.
We have some other equipment as digital fiield strength indicator which is calibrated, may be it will help us.

Thanks & Regards


 
 Reply 
 
Nigel
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
06:59 May-27-2006
Re: Re-calibration of EMCOL 6K Portable Current Flow Magnetic Particle Inspection Unit
Jamil

Calibration of the Emcol unit will primarily be to verify the accuacy of the mounted ammeters, so you will need someone who can check their accuracy back to National Standards. For the magnetic flux function which ia a %age, no calibration is feasible, just a function test. Best bet is to find an approved calibration authority in your area.

Hope this helps. Nigel

----------- Start Original Message -----------
:
: We are using the Current Flow Magnetic Particle Inspection Unit. Its re-calibration is overdue and we want to re-calibrate it. Can anyone guide me how to re-calibrate (in-house) or help me in developing the re-calibration procedure.
: We have some other equipment as digital fiield strength indicator which is calibrated, may be it will help us.
: Thanks & Regards
------------ End Original Message ------------




 
 Reply 
 
mandar vinze
Engineering, manufacturer
magnafield controls, India, Joined May 2006, 3

mandar vinze

Engineering, manufacturer
magnafield controls,
India,
Joined May 2006
3
02:51 Jun-07-2006
Re: Re-calibration of EMCOL 6K Portable Current Flow Magnetic Particle Inspection Unit
we are manufacturers of M T equipment and would be glad to help you in any matter relating to equipment,accesories ,calliberation service etc.We are in India and are in this for more than 30 yrs----------- Start Original Message -----------
: Jamil
: Calibration of the Emcol unit will primarily be to verify the accuacy of the mounted ammeters, so you will need someone who can check their accuracy back to National Standards. For the magnetic flux function which ia a %age, no calibration is feasible, just a function test. Best bet is to find an approved calibration authority in your area.
: Hope this helps. Nigel
: :
: : We are using the Current Flow Magnetic Particle Inspection Unit. Its re-calibration is overdue and we want to re-calibrate it. Can anyone guide me how to re-calibrate (in-house) or help me in developing the re-calibration procedure.
: : We have some other equipment as digital fiield strength indicator which is calibrated, may be it will help us.
: : Thanks & Regards
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window