where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
421 views
Technical Discussions
Azhar Jamil
Engineering, NDT Mechanical Engineer
Pakistan, Joined Feb 2005, 3

Azhar Jamil

Engineering, NDT Mechanical Engineer
Pakistan,
Joined Feb 2005
3
04:10 Jun-03-2006
Re: Demagnetization

Dear Mr. K. Anandam

Thanks for your reply. We have a portable current flow (6K) MPI unit. I think we can use this for de-magnetization, what are your comments regarding that ... if possible explain the procedure in brief.

Regards
Azhar Jamil



 
 Reply 
 
ludovic klein
ludovic klein
01:49 Jun-07-2006
Re: Demagnetization
In fact I use some electrical cables in copper (95 mm²) and I make several turns all around the piece and I make an electrical current.
Regards
----------- Start Original Message -----------
: Dear Mr. K. Anandam
: Thanks for your reply. We have a portable current flow (6K) MPI unit. I think we can use this for de-magnetization, what are your comments regarding that ... if possible explain the procedure in brief.
: Regards
: Azhar Jamil
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window