where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NOVO DR
develops and manufactures cutting edge Portable Digital Radiography X-ray Inspection Systems.
1690 views
Technical Discussions
Linxiao Yu
R & D, NDE in Oil & Gas; Energy; Manufacturing
BP, USA, Joined Aug 2006, 13

Linxiao Yu

R & D, NDE in Oil & Gas; Energy; Manufacturing
BP,
USA,
Joined Aug 2006
13
00:25 Aug-14-2006
Looking for robust coupling device/method for contact auto-UT inspection

Any information on auto-contact UT inspection system is appreciate.



 
 Reply 
 
Wolfgang Bisle
R & D, senior Engineer and nomiated Expert
retired from Airbus Deutschland GmbH, Germany, Joined Jul 2000, 35

Wolfgang Bisle

R & D, senior Engineer and nomiated Expert
retired from Airbus Deutschland GmbH,
Germany,
Joined Jul 2000
35
09:59 Aug-15-2006
Re: Looking for robust coupling device/method for contact auto-UT inspection
You should explain, what you mean....




 
 Reply 
 
Paul Heckman
Paul Heckman
00:00 Aug-15-2006
Re: Looking for robust coupling device/method for contact auto-UT inspection
----------- Start Original Message -----------
: Any information on auto-contact UT inspection system is appreciate.
------------ End Original Message ------------
What type of product are you looking to inspect? I have a contact in US who makes system for round product inspection in grinders.



 
 Reply 
 
Mark Potter
Mark Potter
01:00 Aug-15-2006
Re: Looking for robust coupling device/method for contact auto-UT inspection
----------- Start Original Message -----------
: Any information on auto-contact UT inspection system is appreciate.
------------ End Original Message ------------

It depends heavily on what you are inspecting:- conductive, insulating, of irregular shape etc., as well as wether you can tolerate pressures or couplant fluids on the part under test.

Mark.


 
 Reply 
 
Linxiao Yu
R & D, NDE in Oil & Gas; Energy; Manufacturing
BP, USA, Joined Aug 2006, 13

Linxiao Yu

R & D, NDE in Oil & Gas; Energy; Manufacturing
BP,
USA,
Joined Aug 2006
13
05:38 Aug-16-2006
Re: Looking for robust coupling device/method for contact auto-UT inspection
----------- Start Original Message -----------
: : Any information on auto-contact UT inspection system is appreciate.
: It depends heavily on what you are inspecting:- conductive, insulating, of irregular shape etc., as well as wether you can tolerate pressures or couplant fluids on the part under test.
: Mark.
------------ End Original Message ------------

Metal parts; flat or curved surface; pressure and couplant gel are acceptable.

thanks


 
 Reply 
 
Linxiao Yu
R & D, NDE in Oil & Gas; Energy; Manufacturing
BP, USA, Joined Aug 2006, 13

Linxiao Yu

R & D, NDE in Oil & Gas; Energy; Manufacturing
BP,
USA,
Joined Aug 2006
13
06:53 Aug-16-2006
Re: Looking for robust coupling device/method for contact auto-UT inspection
----------- Start Original Message -----------
: You should explain, what you mean....
------------ End Original Message ------------

Thank you all for your response!

I am developing an auto-inspection system using contact UT. Constant coupling of ultrasound into part is a concern. We are interested in a device (or fixture, coupling mechanism) to ensure consistent coupling. Commercially available product is highly desirable. Information on an overall system is also appreciated.

The access surfaces of the parts to be inspected can be flat, or curved (OD of cylinder).

Thank you all for your information


 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
01:42 Aug-21-2006
Re: Looking for robust coupling device/method for contact auto-UT inspection
What about water perhaps with an inhibitor and a surfactant? Probe and wedge manufacturers will be able to provide you with wedges with stragetically sited drilled holes in a groove on the base of the wedge connected by bayonet-fittings to a water supply through a small bore tube. Cleanliness of the water supply is essential - it should be potable water. This is used for offshore AUT where the pipes can be still hot when the probes come into contact with the surface.

Devise some form of couplant-monitoring.


----------- Start Original Message -----------
: : You should explain, what you mean....
: Thank you all for your response!
: I am developing an auto-inspection system using contact UT. Constant coupling of ultrasound into part is a concern. We are interested in a device (or fixture, coupling mechanism) to ensure consistent coupling. Commercially available product is highly desirable. Information on an overall system is also appreciated.
: The access surfaces of the parts to be inspected can be flat, or curved (OD of cylinder).
: Thank you all for your information
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window