where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
575 views
Technical Discussions
abdulla
Engineering, CORROSION DIV. SUPERINTENDENT
SIRTE OIL COMPANY, Libya, Joined Jun 2004, 7

abdulla

Engineering, CORROSION DIV. SUPERINTENDENT
SIRTE OIL COMPANY,
Libya,
Joined Jun 2004
7
06:42 Sep-01-2004
WELDING TEST

When a UT can be used instead of RT .
Thank you in advance


 
 Reply 
 
S.G.
Consultant
Enrico Enterprises, India, Joined Jul 2004, 20

S.G.

Consultant
Enrico Enterprises,
India,
Joined Jul 2004
20
06:07 Sep-02-2004
Re: WELDING TEST
----------- Start Original Message -----------
: When a UT can be used instead of RT .
: Thank you in advance
------------ End Original Message ------------

RT is very much expensive method and can not use for 100 % weld testing. To cover the 100% weld testing and production capacity is more then UT by autometion or semiautometion can used. We are mfg. of autometed /Semiautometed UT system.

If have any interest , please contact us.

Warm regard
S.G.


 
 Reply 
 
Ed T.
Ed T.
08:24 Sep-02-2004
Re: WELDING TEST
----------- Start Original Message -----------
: When a UT can be used instead of RT .
: Thank you in advance
------------ End Original Message ------------

Which code?


 
 Reply 
 
appalarao
appalarao
02:12 Nov-03-2006
Re: WELDING TEST
weilding----------- Start Original Message -----------
: When a UT can be used instead of RT .
: Thank you in advance
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window