where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
590 views
Technical Discussions
krish
krish
01:14 Nov-16-2006
Tank floor scanning

I would like to know the name and address of any Indian Agency who can carry out corrosion mapping of petroleum products storage tank bottom plate using tank floor scanner-MFL( Magnetic flux leakage) or ultrasound principle(cosasco equipment).


 
 Reply 
 
Sunil N. Ramchandran
Sunil N. Ramchandran
04:59 Nov-16-2006
Re: Tank floor scanning
----------- Start Original Message -----------
: I would like to know the name and address of any Indian Agency who can carry out corrosion mapping of petroleum products storage tank bottom plate using tank floor scanner-MFL( Magnetic flux leakage) or ultrasound principle(cosasco equipment).
------------ End Original Message ------------

Dear Sir:

I sent you an email directly with the contact information for our Mumbai office.

Thank you.
Sunil N. Ramchandran
for TesTex Inc.


 
 Reply 
 
Alan Ashton
Alan Ashton
09:26 Nov-17-2006
Re: Tank floor scanning
----------- Start Original Message -----------
: I would like to know the name and address of any Indian Agency who can carry out corrosion mapping of petroleum products storage tank bottom plate using tank floor scanner-MFL( Magnetic flux leakage) or ultrasound principle(cosasco equipment).
------------ End Original Message ------------

Krish,
We are a leading OEM as well as service provider and i feel sure we can assist you with our Floormap VS2. Please respond to my email


 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window