where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1767 views
Technical Discussions
Matthew Cook
Matthew Cook
02:24 May-30-2003
broad swath ultrasonic thickness testing of ships hulls

NDT folks,

I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.

Any info/advice will be very appreciated.


 
 Reply 
 
Nick Welland
Nick Welland
01:03 May-31-2003
Re: broad swath ultrasonic thickness testing of ships hulls
: NDT folks,
.
: I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.
.
: Any info/advice will be very appreciated.
.
I believe Det Norske Veritas developed an ROV to do this a couple of years ago.
Regards
Nick


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
00:21 Jun-01-2003
Re: broad swath ultrasonic thickness testing of ships hulls
DNV did develop a version of their Corroscan system a numbe rof years ago for this application. it was relatively slow but marinised well. Physical Acoutsics/NDT Automation have developed a Large AREA UT C-Scan system which uses a stand off probe ideal for large resolution scanning but may need marinisation.

We successfully deployed scanning mechanisms for inspecting the bottom of captive tanker hulls for internal corrosion a number of years ago.

For more information contact me direct.



 
 Reply 
 
Richard Kazares
Richard Kazares
04:17 Jun-02-2003
Re: broad swath ultrasonic thickness testing of ships hulls
Test message

: : NDT folks,
: .
: : I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.
: .
: : Any info/advice will be very appreciated.
: .
: I believe Det Norske Veritas developed an ROV to do this a couple of years ago.
: Regards
: Nick
.



 
 Reply 
 
ishbel
Consultant, Engineering Consultant - NDT
Subsea 7, Norway, Joined Nov 1998, 11

ishbel

Consultant, Engineering Consultant - NDT
Subsea 7,
Norway,
Joined Nov 1998
11
09:40 Jun-06-2003
Re: broad swath ultrasonic thickness testing of ships hulls
: DNV did develop a version of their Corroscan system a numbe rof years ago for this application. it was relatively slow but marinised well.

The system DNV developed was a resonance system (not ultrasonics) using low frequency sound travelling through water (not actually based on Corroscan, which itself is based on the Pscan). The system is fast, and is mounted onto a very agile ROV. The company now supplying the service is ARGUS-RTM, and more details can be found at
http://www.oceaneering.com/printpages/oilfield/rov/crawler.htm

Ishbel


 
 Reply 
 
Asad
Asad
00:57 Nov-16-2006
Re: broad swath ultrasonic thickness testing of ships hulls
Dear?
I am sending you the proper link which will solve your problem.... please go to http://www.ndtpace.com
regards,
Asad
asadarizvi@yahoo.com
info@ndtpace.com

: NDT folks,
.
: I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.
.
: Any info/advice will be very appreciated.
.



 
 Reply 
 
Asad
Asad
01:02 Nov-16-2006
Re: broad swath ultrasonic thickness testing of ships hulls
Dear?
I am sending you the link which will solve your problem....please visit http://www.ndtpace.com
regards,
Asad
asadarizvi@yahoo.com
info@ndtpace.com

: : NDT folks,
: .
: : I am looking for a NDT method of performing "full coverage" thickness testing of ships hulls. I need to be able to detect localised corrosion of the inside of a vessels hull by performing an outside scan. The ideal systems would provide 100% coverage of the submerged hull.
: .
: : Any info/advice will be very appreciated.
: .
: I believe Det Norske Veritas developed an ROV to do this a couple of years ago.
: Regards
: Nick
.



 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

MIZ®-21C: Truly Affordable Eddy Current Handheld with Surface Array Capability

Introducing MIZ-21C, the first truly affordable handheld eddy current instrument with surface array
...
capabilities. MIZ-21C can deliver fast, accurate inspections in demanding NDT applications including aerospace, oil and gas, manufacturing, and power generation. The surface array solution can reduce inspection time by up to 95% compared to traditional handheld pencil probes. The ergonomic design, long battery life, and intuitive touchscreen mean you can inspect more areas faster than ever without fatigue.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window