where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1334 views
Technical Discussions
Philippe Rubbers
Engineering
SCM, South Africa, Joined Nov 1998, 22

Philippe Rubbers

Engineering
SCM,
South Africa,
Joined Nov 1998
22
08:28 Aug-11-1999
UT inspections of large castings and austenitic steel

What techniques are available to inspect (volumetric) coarse grain
material,such as castings and austenitic steels, with a thick cross
section? Examples where this material would be used is in the
primary loop of nuclear power stations, and in pipe work in the
petrochemical industry.

Thanks


 
 Reply 
 
jayesh.vanza
jayesh.vanza
07:53 Aug-11-1999
Re: UT inspections of large castings and austenitic steel
: What techniques are available to inspect (volumetric) coarse grain
: material,such as castings and austenitic steels, with a thick cross
: section? Examples where this material would be used is in the
: primary loop of nuclear power stations, and in pipe work in the
: petrochemical industry.

: Thanks




 
 Reply 
 
GAF
GAF
03:16 Aug-13-1999
Re: UT inspections of large castings and austenitic steel
: : What techniques are available to inspect (volumetric) coarse grain
: : material,such as castings and austenitic steels, with a thick cross
: : section? Examples where this material would be used is in the
: : primary loop of nuclear power stations, and in pipe work in the
: : petrochemical industry.

: : Thanks

Depends on the material and what type of inspection but in general Ultrasonic inspection of CSS components has been unreliable. Your best bet is a low freqency focused dual L wave 3/4 or 1 meg for crack detection



 
 Reply 
 
Norm Woodward
Norm Woodward
08:42 Aug-13-1999
Re: UT inspections of large castings and austenitic steel
: What techniques are available to inspect (volumetric) coarse grain
: material,such as castings and austenitic steels, with a thick cross
: section? Examples where this material would be used is in the
: primary loop of nuclear power stations, and in pipe work in the
: petrochemical industry.

I have no first hand experience with them, but Krautkramer, and a few others, were pushing "composite transducers" as a solution to inspecting noisy materials.

As I recall, this site had some on-line articles about them back in the fall of '96.

Hope this helps,

Norm


 
 Reply 
 
Russ Minkwitz
Russ Minkwitz
09:59 Aug-13-1999
Re: UT inspections of large castings and austenitic steel
: What techniques are available to inspect (volumetric) coarse grain
: material,such as castings and austenitic steels, with a thick cross
: section? Examples where this material would be used is in the
: primary loop of nuclear power stations, and in pipe work in the
: petrochemical industry.

Sir,

Dual element critically refracted longitudinal waves have been used for such applications for years. They are mentioned in IIW handbook on the examination of austenetic welds.

Further there are more detailed papers on dual element and tandem techniques published by RTD and Panametrics.

If you would like copies please provide you address and we will send more information.

Best Regards,
Russ Minkwitz
Manager, Transducer Sales





 
 Reply 
 
satish
satish
09:38 Oct-29-1999
Re: UT inspections of large castings and austenitic steel
: What techniques are available to inspect (volumetric) coarse grain
: material,such as castings and austenitic steels, with a thick cross
: section? Examples where this material would be used is in the
: primary loop of nuclear power stations, and in pipe work in the
: petrochemical industry.

: Thanks




 
 Reply 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window