 827 views |
 Technical Discussions | | Roderic K Stanley
 | Roderic K Stanley
|  01:22 Aug-16-1999
COATING THICKNESS MEASUREMENT INSIDE COILED TUBING.N We make carbon steel coiled tubing. Someone has sated he can coat it internally with a plastic layer 0.020 in thick. Does anyone have a device that can run 10,000 ft through coiled tubing on a spool and determine the coating thickness. It ought to be possible with eddy current stand-off sensors mounted in a 'pig" , with a lot of electronics to store the data. Roderic K Stanley Sr Research Scientist.
| |
| | | |  Leon Vandervalk
R & D
DeFelsko Corporation, USA, Joined Oct 1999,  3 | | 00:16 Aug-20-1999
Re: COATING THICKNESS MEASUREMENT INSIDE COILED TUBING.N We make handheld battery operated coating thickness gages that could easly be mounted on a pig. On board memory could easily support 10,000+ readings.
| |
| | | | Leon Vandervalk
R & D
DeFelsko Corporation, USA, Joined Oct 1999, 3 | | 00:23 Aug-20-1999
Re: COATING THICKNESS MEASUREMENT INSIDE COILED TUBING.N We make handheld battery operated coating thickness gages that could easily be mounted on a pig. On board memory could easily support 10,000+ readings.
| |
| | | |  Richard D. Roberts
Engineering, Executive Managment
Quest Integrity Group, USA, Joined Nov 1998, 78  | | 07:53 Sep-07-1999
Re: COATING THICKNESS MEASUREMENT INSIDE COILED TUBING.N Dear Mr. Roderic K Stanley,QUEST Integrated, Inc. manafactures several types of Tube ID Inspection systems. One remote pigging system inparticular utilizes both ultasonics and laser. I think it is much too large for your tubing. Can you provide more detailed specifications on the tubing (ie Diameter, Thickness, Material, etc.)? Regards,
Richard D. Roberts
QUEST Integrated, Inc.
| |
| | |  UCI Hardness Tester NOVOTEST T-U2UCI hardness tester NOVOTEST T-U2 is is used for non-destructive
hardness testing of:
metals and ... alloys by scales of hardness: Rockwell (HRC), Brinell
(HB), Vickers (HV);
non-ferrous metals, alloys of iron etc., and using five additional
scales for calibration;
with tensile strength (Rm) scale determines the tensile strength
of carbon steel pearlitic products by automatic recalculation from
Brinell (HB) hardness scale.
>  NEW - TD Focus-ScanRXThe NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut ... ion.
Key Improvements
1. Data acquisition is significantly faster than current design
2. Better aesthetic – closely aligns with HandyScan RX
3. Improved IP rating (Target IP66)
4. Ruggedized housing
5. Connectors are protected from impact and ingress
6. Integrated stand and separate retractable handle
easy to keep clean)
7. Touchscreen with ruggedized display glass
8. 3-Axis encoder input
>  FMC/TFMNext generation for Phased Array UT is here now with FMC/TFM! Have higher
resolution imaging, impr ... oved signal to noise ratio, characterize, size and analyze
defects better with access to several wave mode views and save raw FMC data for
higher quality analysis. Some of the benefits are:
- Beautiful Image! Easier to understand what you're looking at
- Completely focused in entire image or volume
- Much easier to define setups before inspection
- Easier to decipher geometry echoes from real defects
- Oriented defects (e.g. cracks) are imaged better
- See image from different wave modes from one FMC inspection
- FMC data can be reprocessed/analyzed without going back to the field
> |
|
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
|
.jpg "Stand: EKOSCAN")
QUEST Integrated, Inc.
