where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NDTSS - Non Destructive Testing Society of Singapore
Visit us at SINCE 2019
370 views
Technical Discussions
John
John
04:03 Nov-30-2006
Re: why TOFD cursor is parabola?

Hello Ed Ginzel;
But the guys use two phase array probes with shear wave wedge, the wedge is designed to generate 45degree shear wave, the angle is larger than the first critical angle, I don't think that it can generate Longitudinal wave in the sample, but conventional TOFD use LW, so I want to know can we use phase array probes with shear wave wedge to do TOFD technology?
Thank you!

----------- Start Original Message -----------
: Yun Xi
: Once a phased array generated pulse leaves the wedge it is not significantly different from a pulse made using a single element. If the phased array probe aperature is the same as a single element then the beam characteristics are the same.
: Phased array generated TOFD provides "convenience" to some users. It is often useful to have TOFD information even when doing a weld inspection with pulse-echo techniques; e.g. using Electronic raster scans (E-scans0 or sectorial (S-scans). This allows the operator a fast method of determining if the pulse-echo signal originates from a geometric condition or from a real flaw.
: But there are limits. If you want to just do a TOFD examination (without the phased array pulse-echo) you could design a multi zone TOFD technique with different frequency probes to optimise results. e.g. a 3mm diameter 15MHz TOFD probe for the upper 10mm of a weld inspection and a 5MHz 6mm diameter probe for the lower regions. Phased array generated TOFD would not have the ability to provide the improved upper zone coverage as its frequency is fixed. Also, there may be physical restrictions of the Phased Array probe wedge limiting the approach of the wedge to the weld cap. This may prevent optimum PCS being achieved.
: In spite of the limitations, I have seen some TOFD generated by phased array that is superior to some of the single element TOFD being provided by others on similar projects.
: It works the other way around too.
: It is often useful to have pulse-echo information when doing a TOFD technique. TOFD when used as a single pass D-scan does not provide information about which side of a weld a flaw occurs. You could do offset TOFD or even B-scan TOFD to determine the side of the weld a nonfusion was occurring by this may not be an option if the weld cap is left on and presents a scanning restriction. But pulse-echo can provide the information quickly. It is all the more convenient if this can be done using a single pass with a pair of phased array probes
: Regards
: Ed
: : Some guys use two phase array probe as TOFD,would you like tell me that is there any differene between typical TOFD?
: : Thank you for your reply.
: :
: : : YunXi:
: : : Typically TOFD uses a relatively small diameter element. The pressure boundary of such a probe can be approximated by a cone. Now imagine passing such a cone past a small point diffractor in its path. The point will first be detected far away as the edge of the cone detects the flaw. As the probe is moved along its straight scan path the flaw gets closer untilthe flaw is directly across from the probe. As the probe continues its scan movement past the flaw the process reverses and the flaw gets further away. The effect is like taking a slice through the cone. If you were to cut a cone at some point parallel to the central axis the remaining cross section is the definition of a parabola!
: : : The actual shape of the beam boudary is defeined by a Bessel function but the effect is effectively the same as a cone.
: : : The same effect can be seen on the shape of small targets in pulse-echo but the process is called backscatter instead of TOFD (forward scatter).
: : : Ed
: : :
: : : : I want to know why TOFD cursor is parabola?and what decide the parameter of the curve?is there any equation?Thanks a lot
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window