where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
550 views
Technical Discussions
Rolando Perez Hernandez
Engineering
Empet, Cuba, Joined Jul 2006, 1

Rolando Perez Hernandez

Engineering
Empet,
Cuba,
Joined Jul 2006
1
03:55 Sep-07-2006
Need information about inspection welding criteria

I need to find the criteria for welding inspection with ndt by ultrasonic


 
 Reply 
 
Vikas Dighe
Vikas Dighe
00:09 Sep-23-2006
Re: Need information about inspection welding criteria
Welding inspection with what acceptance criterion? ASME or EN?

----------- Start Original Message -----------
: I need to find the criteria for welding inspection with ndt by ultrasonic
------------ End Original Message ------------




 
 Reply 
 
Eng.Ahmad
NDT Inspector, ASNT NDT Level III (UT, PT & MT) New Vision for Technical Services GM (www.nevcc.com)
New Vision for Technical services , Jordan, Joined Jan 2007, 38

Eng.Ahmad

NDT Inspector, ASNT NDT Level III (UT, PT & MT) New Vision for Technical Services GM (www.nevcc.com)
New Vision for Technical services ,
Jordan,
Joined Jan 2007
38
01:21 Jan-16-2007
Re: Need information about inspection welding criteria
----------- Start Original Message -----------
: Welding inspection with what acceptance criterion? ASME or EN?
: : I need to find the criteria for welding inspection with ndt by ultrasonic
------------ End Original Message ------------

hi friend

did you get any accept rejct critria
if yos plz can i see it


 
 Reply 
 

Product Spotlight

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Micro CT

nanoVoxel series has nano-scale resolution by using high voltage X-ray source (from 80-300 kV) wit
...
h micro focal spot and highly sensitive detector including different kinds of big size panel detectors and lens coupling CCD.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window