where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

TecScan Systems
We offer a complete line of NDT scanners, Immersion Tanks & Gantry systems which incorporate Ultrasonic, Phased Array & Eddy Current technologies.
1267 views
Technical Discussions
gaf
gaf
01:19 Aug-26-1999
Sound velocity in water

Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
01:48 Aug-26-1999
Re: Sound velocity in water

: Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.

How hot? In what sort of container? In general, the way we usually measure sound velocities in liquids is to put the stuff in a test cell with parallel walls and measure the transit time across the resulting fixed sound path between the inside walls of the container. The transit time measurement can be done with any one of a number of ultrasonic instruments. Maybe you can provide a few more details about the circumstances of your test.

--Tom Nelligan
Panametrics, Inc.


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1286

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1286
03:27 Aug-26-1999
Re: Sound velocity in water
: Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.

I have an old copy of the CRC Handbook of Chemistry and Physics. There is a section on sound velocity in it. There is even a special item on velocities for water over 212F (100C)

The source is from Acoustical Society of America volume 31, 1959, J.C.McDade, D.R.Pardue, AL Gedrich and F.Vrataric

It is a long list of temperatures and velocities. I will supply a few but you can get the CRC Handbook from any library. Temp I provide in degrees F and Velocity in m/s

Temp Vel
200 1548
210 1544
220 1538
230 1532
240 1524
250 1516
260 1507
270 1497
280 1487
290 1476
300 1465
At 550 degrees F the velocity they publish is 980m/s

Hope this helps

Ed


 
 Reply 
 
Wieslaw Bicz
Engineering,
PBP Optel sp. z o.o., Poland, Joined Feb 2009, 266

Wieslaw Bicz

Engineering,
PBP Optel sp. z o.o.,
Poland,
Joined Feb 2009
266
07:46 Aug-28-1999
Re: Sound velocity in water
:
: : Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.

: How hot? In what sort of container? In general, the way we usually measure sound velocities in liquids is to put the stuff in a test cell with parallel walls and measure the transit time across the resulting fixed sound path between the inside walls of the container. The transit time measurement can be done with any one of a number of ultrasonic instruments. Maybe you can provide a few more details about the circumstances of your test.

: --Tom Nelligan
: Panametrics, Inc.

It is really not difficult to measure the sound velocity, unless you don´t need a very high precision (it could be for example important, if you want to measure weak solutions etc.).
For high accuracy measurements you will need equipment with higher time measurement precision as typically used and it could be necessary to compensate the wall effects, diffraction effects etc.

Wieslaw Bicz

Optel (http://www.optel.com.pl)


 
 Reply 
 
chittakorn Polyon
chittakorn Polyon
08:07 Dec-12-1999
Re: Sound velocity in water
: Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.




 
 Reply 
 
Oscar Fernando Cota Monjaras
Oscar Fernando Cota Monjaras
03:02 Jun-24-2000
cylinder vibrating modes
Hi.

Can anybody give me the formula for calculating the vibrating modes of a cylinder?

Thank you. Oscar Cota


 
 Reply 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window