where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1268 views
Technical Discussions
gaf
gaf
01:19 Aug-26-1999
Sound velocity in water

Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
01:48 Aug-26-1999
Re: Sound velocity in water

: Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.

How hot? In what sort of container? In general, the way we usually measure sound velocities in liquids is to put the stuff in a test cell with parallel walls and measure the transit time across the resulting fixed sound path between the inside walls of the container. The transit time measurement can be done with any one of a number of ultrasonic instruments. Maybe you can provide a few more details about the circumstances of your test.

--Tom Nelligan
Panametrics, Inc.


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1286

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1286
03:27 Aug-26-1999
Re: Sound velocity in water
: Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.

I have an old copy of the CRC Handbook of Chemistry and Physics. There is a section on sound velocity in it. There is even a special item on velocities for water over 212F (100C)

The source is from Acoustical Society of America volume 31, 1959, J.C.McDade, D.R.Pardue, AL Gedrich and F.Vrataric

It is a long list of temperatures and velocities. I will supply a few but you can get the CRC Handbook from any library. Temp I provide in degrees F and Velocity in m/s

Temp Vel
200 1548
210 1544
220 1538
230 1532
240 1524
250 1516
260 1507
270 1497
280 1487
290 1476
300 1465
At 550 degrees F the velocity they publish is 980m/s

Hope this helps

Ed


 
 Reply 
 
Wieslaw Bicz
Engineering,
PBP Optel sp. z o.o., Poland, Joined Feb 2009, 266

Wieslaw Bicz

Engineering,
PBP Optel sp. z o.o.,
Poland,
Joined Feb 2009
266
07:46 Aug-28-1999
Re: Sound velocity in water
:
: : Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.

: How hot? In what sort of container? In general, the way we usually measure sound velocities in liquids is to put the stuff in a test cell with parallel walls and measure the transit time across the resulting fixed sound path between the inside walls of the container. The transit time measurement can be done with any one of a number of ultrasonic instruments. Maybe you can provide a few more details about the circumstances of your test.

: --Tom Nelligan
: Panametrics, Inc.

It is really not difficult to measure the sound velocity, unless you don´t need a very high precision (it could be for example important, if you want to measure weak solutions etc.).
For high accuracy measurements you will need equipment with higher time measurement precision as typically used and it could be necessary to compensate the wall effects, diffraction effects etc.

Wieslaw Bicz

Optel (http://www.optel.com.pl)


 
 Reply 
 
chittakorn Polyon
chittakorn Polyon
08:07 Dec-12-1999
Re: Sound velocity in water
: Does anybody have any information about how to determine sound velocity in water at elevated teperatures. Temperatures would be greater than the boiling point at atmospheric pressures.




 
 Reply 
 
Oscar Fernando Cota Monjaras
Oscar Fernando Cota Monjaras
03:02 Jun-24-2000
cylinder vibrating modes
Hi.

Can anybody give me the formula for calculating the vibrating modes of a cylinder?

Thank you. Oscar Cota


 
 Reply 
 

Product Spotlight

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window