where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1203 views
Technical Discussions
Dick Dobson
Dick Dobson
06:22 Aug-27-1999
Testing for defects

Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?
Thank you for your help.
Dick Dobson, Systems Engineer
www.conleyfrp.com

Conley Corporation
2795 East 91st Street
Tulsa, Oklahoma USA 74137
1-800-331-5502 or (918) 299-5051 / Fax (918) 299-5907


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
07:15 Aug-27-1999
Re: Testing for defects

: Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
: Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?

If your process can accomodate squirting water on the parts, you could use an on-line ultrasonic flaw detection system to find voids and delaminations. This is fairly straightforward for pipe testing. More complex shapes like fittings would require a contour-following scanner that would probably be too slow for 100% in-process inspection. (The limitation is that a focused sound beam has to be aimed at a specific angle wih respect to each point on the surface, so scanning complex shapes requires a lot of probe manipulation.)

My company is one of a number that make this sort of thing. You can find product information under the Automated Systems section of our web site.

--Tom Nelligan
Panametrics, Inc.
www.panametrics.com/ndt/


 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
02:13 Aug-27-1999
Re: Testing for defects
: Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
: Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?
: Thank you for your help.

Dear Dick,

Lixi can offer to you either a hand held real time X-Ray (fluoroscope) or density profiler to find voids and variation in the density of the pipe.


Regards,

Joe Pascente
: Dick Dobson, Systems Engineer
: www.conleyfrp.com
:
: Conley Corporation
: 2795 East 91st Street
: Tulsa, Oklahoma USA 74137
: 1-800-331-5502 or (918) 299-5051 / Fax (918) 299-5907




 
 Reply 
 
Terry Oldberg
Engineering, Mechanical Electrical Nuclear Software
Consultant, USA, Joined Oct 1999, 42

Terry Oldberg

Engineering, Mechanical Electrical Nuclear Software
Consultant,
USA,
Joined Oct 1999
42
04:00 Aug-31-1999
Re: Testing for defects
: Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
: Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?
: Thank you for your help.
: Dick Dobson, Systems Engineer
: www.conleyfrp.com
:
: Conley Corporation
: 2795 East 91st Street
: Tulsa, Oklahoma USA 74137
: 1-800-331-5502 or (918) 299-5051 / Fax (918) 299-5907




 
 Reply 
 
Terry Oldberg
Engineering, Mechanical Electrical Nuclear Software
Consultant, USA, Joined Oct 1999, 42

Terry Oldberg

Engineering, Mechanical Electrical Nuclear Software
Consultant,
USA,
Joined Oct 1999
42
06:30 Aug-31-1999
Re: Testing for defects
I recommend that you restate your requirement, as all of the various tests for defects are partially or completely opaque to scientific investigation. For information on this, see the discussion of violations of the Unit Measure axiom of probability theory in this forum. To give yourself the basis for evaluating bids, ask the bidders to supply you with the false negative and false positive error probabilities for the proposed tests.

Tests that are open to scientific investigation have the property of preserving the Unit Measure axiom of probability theory. To accomplish this, specify that the test is to classify each element of a partition of the material as sound or defective by reference to a definitive test which you name.

: Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
: Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?
: Thank you for your help.
: Dick Dobson, Systems Engineer
: www.conleyfrp.com
:
: Conley Corporation
: 2795 East 91st Street
: Tulsa, Oklahoma USA 74137
: 1-800-331-5502 or (918) 299-5051 / Fax (918) 299-5907




 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

GEKKO, Standard and Advanced phased-array for Easier inspection

M2M Gekko® is a field-proven flaw detector offering PAUT, UT, TOFD and TFM through the streamline
...
d user interface Capture™. Released in 32:128, 64:64 or 64:128 channel configurations, Gekko combines high- resolution and speed while reducing inspectors’ training time.
>

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window