where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Zawada NDT
Suppliers of instruments to test steel wire ropes in-situ, using magnetic, non-destructive method.
1158 views
Technical Discussions
Dick Dobson
Dick Dobson
06:22 Aug-27-1999
Testing for defects

Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?
Thank you for your help.
Dick Dobson, Systems Engineer
www.conleyfrp.com

Conley Corporation
2795 East 91st Street
Tulsa, Oklahoma USA 74137
1-800-331-5502 or (918) 299-5051 / Fax (918) 299-5907


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
07:15 Aug-27-1999
Re: Testing for defects

: Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
: Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?

If your process can accomodate squirting water on the parts, you could use an on-line ultrasonic flaw detection system to find voids and delaminations. This is fairly straightforward for pipe testing. More complex shapes like fittings would require a contour-following scanner that would probably be too slow for 100% in-process inspection. (The limitation is that a focused sound beam has to be aimed at a specific angle wih respect to each point on the surface, so scanning complex shapes requires a lot of probe manipulation.)

My company is one of a number that make this sort of thing. You can find product information under the Automated Systems section of our web site.

--Tom Nelligan
Panametrics, Inc.
www.panametrics.com/ndt/


 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
02:13 Aug-27-1999
Re: Testing for defects
: Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
: Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?
: Thank you for your help.

Dear Dick,

Lixi can offer to you either a hand held real time X-Ray (fluoroscope) or density profiler to find voids and variation in the density of the pipe.


Regards,

Joe Pascente
: Dick Dobson, Systems Engineer
: www.conleyfrp.com
:
: Conley Corporation
: 2795 East 91st Street
: Tulsa, Oklahoma USA 74137
: 1-800-331-5502 or (918) 299-5051 / Fax (918) 299-5907




 
 Reply 
 
Terry Oldberg
Engineering, Mechanical Electrical Nuclear Software
Consultant, USA, Joined Oct 1999, 42

Terry Oldberg

Engineering, Mechanical Electrical Nuclear Software
Consultant,
USA,
Joined Oct 1999
42
04:00 Aug-31-1999
Re: Testing for defects
: Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
: Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?
: Thank you for your help.
: Dick Dobson, Systems Engineer
: www.conleyfrp.com
:
: Conley Corporation
: 2795 East 91st Street
: Tulsa, Oklahoma USA 74137
: 1-800-331-5502 or (918) 299-5051 / Fax (918) 299-5907




 
 Reply 
 
Terry Oldberg
Engineering, Mechanical Electrical Nuclear Software
Consultant, USA, Joined Oct 1999, 42

Terry Oldberg

Engineering, Mechanical Electrical Nuclear Software
Consultant,
USA,
Joined Oct 1999
42
06:30 Aug-31-1999
Re: Testing for defects
I recommend that you restate your requirement, as all of the various tests for defects are partially or completely opaque to scientific investigation. For information on this, see the discussion of violations of the Unit Measure axiom of probability theory in this forum. To give yourself the basis for evaluating bids, ask the bidders to supply you with the false negative and false positive error probabilities for the proposed tests.

Tests that are open to scientific investigation have the property of preserving the Unit Measure axiom of probability theory. To accomplish this, specify that the test is to classify each element of a partition of the material as sound or defective by reference to a definitive test which you name.

: Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
: Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?
: Thank you for your help.
: Dick Dobson, Systems Engineer
: www.conleyfrp.com
:
: Conley Corporation
: 2795 East 91st Street
: Tulsa, Oklahoma USA 74137
: 1-800-331-5502 or (918) 299-5051 / Fax (918) 299-5907




 
 Reply 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window