where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

638 views
Technical Discussions
yeslvan
NDT Inspector
SHARP INDIA, India, Joined Sep 2005, 1

yeslvan

NDT Inspector
SHARP INDIA,
India,
Joined Sep 2005
1
05:14 Jan-29-2007
Duplex Stainless Steel

I need a make Duplex Stainless Steel Block for Ultrasonic Thickness Measurement , any body can suggest velocity differnce between Duplex Stainless Steel and Stainless Steel, if velocity difference is not matter, so that i can callibrate in stainless steel material, and perform the thickness measurement of Duplex Stain Less Steel material.


 
 Reply 
 
Simon Amallraja
Simon Amallraja
08:21 Jan-30-2007
Re: Duplex Stainless Steel
----------- Start Original Message -----------
: I need a make Duplex Stainless Steel Block for Ultrasonic Thickness Measurement , any body can suggest velocity differnce between Duplex Stainless Steel and Stainless Steel, if velocity difference is not matter, so that i can callibrate in stainless steel material, and perform the thickness measurement of Duplex Stain Less Steel material.
------------ End Original Message ------------

We represent PH Tools of USA for all types of Reference Blocks in India. Visit www.phtools.com and find out the block reqd for you. You will have lot of inputs in that site.

If you need a quote, contact me @ 09866343309 or email @ simon.amallraja@mahindra.com

Simon Amallraja


 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window