where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

636 views
Technical Discussions
yeslvan
NDT Inspector
SHARP INDIA, India, Joined Sep 2005, 1

yeslvan

NDT Inspector
SHARP INDIA,
India,
Joined Sep 2005
1
05:14 Jan-29-2007
Duplex Stainless Steel

I need a make Duplex Stainless Steel Block for Ultrasonic Thickness Measurement , any body can suggest velocity differnce between Duplex Stainless Steel and Stainless Steel, if velocity difference is not matter, so that i can callibrate in stainless steel material, and perform the thickness measurement of Duplex Stain Less Steel material.


 
 Reply 
 
Simon Amallraja
Simon Amallraja
08:21 Jan-30-2007
Re: Duplex Stainless Steel
----------- Start Original Message -----------
: I need a make Duplex Stainless Steel Block for Ultrasonic Thickness Measurement , any body can suggest velocity differnce between Duplex Stainless Steel and Stainless Steel, if velocity difference is not matter, so that i can callibrate in stainless steel material, and perform the thickness measurement of Duplex Stain Less Steel material.
------------ End Original Message ------------

We represent PH Tools of USA for all types of Reference Blocks in India. Visit www.phtools.com and find out the block reqd for you. You will have lot of inputs in that site.

If you need a quote, contact me @ 09866343309 or email @ simon.amallraja@mahindra.com

Simon Amallraja


 
 Reply 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window