where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1202 views
Technical Discussions
Dick Dobson
Dick Dobson
06:22 Aug-27-1999
Testing for defects

Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?
Thank you for your help.
Dick Dobson, Systems Engineer
www.conleyfrp.com

Conley Corporation
2795 East 91st Street
Tulsa, Oklahoma USA 74137
1-800-331-5502 or (918) 299-5051 / Fax (918) 299-5907


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
07:15 Aug-27-1999
Re: Testing for defects

: Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
: Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?

If your process can accomodate squirting water on the parts, you could use an on-line ultrasonic flaw detection system to find voids and delaminations. This is fairly straightforward for pipe testing. More complex shapes like fittings would require a contour-following scanner that would probably be too slow for 100% in-process inspection. (The limitation is that a focused sound beam has to be aimed at a specific angle wih respect to each point on the surface, so scanning complex shapes requires a lot of probe manipulation.)

My company is one of a number that make this sort of thing. You can find product information under the Automated Systems section of our web site.

--Tom Nelligan
Panametrics, Inc.
www.panametrics.com/ndt/


 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
02:13 Aug-27-1999
Re: Testing for defects
: Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
: Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?
: Thank you for your help.

Dear Dick,

Lixi can offer to you either a hand held real time X-Ray (fluoroscope) or density profiler to find voids and variation in the density of the pipe.


Regards,

Joe Pascente
: Dick Dobson, Systems Engineer
: www.conleyfrp.com
:
: Conley Corporation
: 2795 East 91st Street
: Tulsa, Oklahoma USA 74137
: 1-800-331-5502 or (918) 299-5051 / Fax (918) 299-5907




 
 Reply 
 
Terry Oldberg
Engineering, Mechanical Electrical Nuclear Software
Consultant, USA, Joined Oct 1999, 42

Terry Oldberg

Engineering, Mechanical Electrical Nuclear Software
Consultant,
USA,
Joined Oct 1999
42
04:00 Aug-31-1999
Re: Testing for defects
: Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
: Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?
: Thank you for your help.
: Dick Dobson, Systems Engineer
: www.conleyfrp.com
:
: Conley Corporation
: 2795 East 91st Street
: Tulsa, Oklahoma USA 74137
: 1-800-331-5502 or (918) 299-5051 / Fax (918) 299-5907




 
 Reply 
 
Terry Oldberg
Engineering, Mechanical Electrical Nuclear Software
Consultant, USA, Joined Oct 1999, 42

Terry Oldberg

Engineering, Mechanical Electrical Nuclear Software
Consultant,
USA,
Joined Oct 1999
42
06:30 Aug-31-1999
Re: Testing for defects
I recommend that you restate your requirement, as all of the various tests for defects are partially or completely opaque to scientific investigation. For information on this, see the discussion of violations of the Unit Measure axiom of probability theory in this forum. To give yourself the basis for evaluating bids, ask the bidders to supply you with the false negative and false positive error probabilities for the proposed tests.

Tests that are open to scientific investigation have the property of preserving the Unit Measure axiom of probability theory. To accomplish this, specify that the test is to classify each element of a partition of the material as sound or defective by reference to a definitive test which you name.

: Conley Corporation is a manufacturer of corrosion resistant nexus reinforced filament wound fiberglass pipe and fittings, double containment fiberglass reinforced pipe and fittings, valves and strainers, and complete frp piping systems.
: Do you know of any online (production) testing equipment or systems for detecting flaws, laminations, voids, etc. in the production of filament wound pipes and fittings?
: Thank you for your help.
: Dick Dobson, Systems Engineer
: www.conleyfrp.com
:
: Conley Corporation
: 2795 East 91st Street
: Tulsa, Oklahoma USA 74137
: 1-800-331-5502 or (918) 299-5051 / Fax (918) 299-5907




 
 Reply 
 

Product Spotlight

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window