where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1474 views
Technical Discussions
Ann Hsu
Ann Hsu
06:40 Feb-13-2007
NDT for polymers?

Hi,

I am trying to find a way to detect weak adhesion in polishing pads. The materials are polyurethane (with voids inside and grooves on the surface) and polymer coated on polyester substrate. The 2 pads are put together with PSA. Do you know if any NDT might work on this types of materials? The pad size is 30" in diameter.

Thanks,


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
09:19 Feb-13-2007
Re: NDT for polymers?
In typical applications of thsi type, ultrasonic testing can readily detect the presence or absence of bonding between two polymer layers, but usually not the degree of adhesion in an adhesive bond, unless poor adhesion is associated with microporosity at the bondline rather than poor chemisty. If the polyurethane is grooved it will probably be necessary to test from the polyester side (assuming that it is smooth) to get uniform sound counpling. I am assuming that the polyester is fairly thin and that sound transmission through that layer won't be a problem.


 
 Reply 
 
Ann Hsu
Ann Hsu
00:33 Feb-13-2007
Re: NDT for polymers - lab services?
Thank you for the information. I would like to find out if any companies would provide such service. Most companies that offer NDT are for large structure (tanks, pipes). If you or any company you know that can do this kind of task please let me know. Maybe I should search for lab testing?

Thanks!!



 
 Reply 
 
Randy Plis
Sales,
Metals Testing Company, USA, Joined Jun 2002, 9

Randy Plis

Sales,
Metals Testing Company,
USA,
Joined Jun 2002
9
01:10 Feb-14-2007
Re: NDT for polymers - lab services?
----------- Start Original Message -----------
: Thank you for the information. I would like to find out if any companies would provide such service. Most companies that offer NDT are for large structure (tanks, pipes). If you or any company you know that can do this kind of task please let me know. Maybe I should search for lab testing?
: Thanks!!
------------ End Original Message ------------

Hello Ann,

Metals Testing Company is one such lab. We inspect metal and non-metal parts on both an R&D and production basis. We have various experience with bondline testing, based primarily on advanced UT C-Scan technology.

The best way to determine if your application can be satisfied by UT is to provide a calibration standard or a sample part that can be transformed into a cal standard. If interested, please contct us. Thanks.



 
 Reply 
 
P V SASTRY
R & D, NDT tecniques metallurgy
TAKEN VRS FROM THE POSITION OF SR. DEPUTY GENERAL MANAGER BHEL CORPORATE R&D, India, Joined Jan 2003, 195

P V SASTRY

R & D, NDT tecniques metallurgy
TAKEN VRS FROM THE POSITION OF SR. DEPUTY GENERAL MANAGER BHEL CORPORATE R&D,
India,
Joined Jan 2003
195
00:23 Feb-15-2007
Re: NDT for polymers - lab services?
Dear Sir,

I am heading SSVS METALLURGICAL AND NDT SERVICES based in Hyderabad, India. We do lot of UT and other NDT particularly relevant to RLA of Thermal Power Plants. Our message is almost same in that we under take UT of metallic and non metallic parts on both production and R & D basis. We have carried out c scans of various parts including bond testing of brazed joints using an advanced UT set up.

As rightly mentioned by Mr. Randy Plis the best way is to provide a calibration standard or two sample parts (one sound and the other with delibrately intorduced defects).We will test the firstpiece without any finacial implications to either side.
If interested, please contct us.

Thanks

P V SASTRY

----------- Start Original Message -----------
: : Thank you for the information. I would like to find out if any companies would provide such service. Most companies that offer NDT are for large structure (tanks, pipes). If you or any company you know that can do this kind of task please let me know. Maybe I should search for lab testing?
: : Thanks!!
: Hello Ann,
: Metals Testing Company is one such lab. We inspect metal and non-metal parts on both an R&D and production basis. We have various experience with bondline testing, based primarily on advanced UT C-Scan technology.
: The best way to determine if your application can be satisfied by UT is to provide a calibration standard or a sample part that can be transformed into a cal standard. If interested, please contct us. Thanks.
------------ End Original Message ------------




 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 608

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
608
01:06 Feb-15-2007
Re: NDT for polymers - lab services?
Ann Hsu,

It might help to mention where you are located and if no secret also you company name and a bit more about you application, for what the parts are needed, how many parts you need to test .... ?

Or are you interested in buying an equipment if the job can be done. In that case many equipment supplier will proof the capability of inspection free of charge.

Rolf

----------- Start Original Message -----------
: Thank you for the information. I would like to find out if any companies would provide such service. Most companies that offer NDT are for large structure (tanks, pipes). If you or any company you know that can do this kind of task please let me know. Maybe I should search for lab testing?
: Thanks!!
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window