where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1818 views
Technical Discussions
azri
azri
05:39 Feb-11-2007
MPI Underwater

Does anybody could give some knowledge of how to carried out UT and MPI for underwater, i means that the technique used and equipment used.

thank you


 
 Reply 
 
giorgio lucido
giorgio lucido
04:54 Feb-21-2007
Re: MPI Underwater
There are several UT single point measurement techniques and products for single point measurement (Cygnus for example).
also there is a Guided wave (LRUT) technique called GUL Subsea system for underwater inspection of long lengths of pipes.


 
 Reply 
 
Martin Lugg
Consultant,
Eddyfi Technologies, United Kingdom, Joined Nov 2000, 27

Martin Lugg

Consultant,
Eddyfi Technologies,
United Kingdom,
Joined Nov 2000
27
06:13 Feb-22-2007
Re: MPI Underwater
----------- Start Original Message -----------
: Does anybody could give some knowledge of how to carried out UT and MPI for underwater, i means that the technique used and equipment used.
: thank you
------------ End Original Message ------------

If you are looking at MPI underwater, you should consider ACFM. This was developed for inspecting welded tubular structures underwater and has several advantages for detecting surface-breaking defects: it can be used 24 hours per day, it provides defect depth information, it provides auditable results and doesn't rely on operator interpretation, and it doesn't require cleaning to bright metal.


 
 Reply 
 
Simon Amallraja
Director
PET Aviation Systems P Ltd, India, Joined Jul 2003, 20

Simon Amallraja

Director
PET Aviation Systems P Ltd,
India,
Joined Jul 2003
20
07:51 Feb-22-2007
Re: MPI Underwater
----------- Start Original Message -----------
: : Does anybody could give some knowledge of how to carried out UT and MPI for underwater, i means that the technique used and equipment used.
: : thank you
: If you are looking at MPI underwater, you should consider ACFM. This was developed for inspecting welded tubular structures underwater and has several advantages for detecting surface-breaking defects: it can be used 24 hours per day, it provides defect depth information, it provides auditable results and doesn't rely on operator interpretation, and it doesn't require cleaning to bright metal.
------------ End Original Message ------------

You can contact Force Technology from Denmark. They have sub sea UT application system mainly used for Off Shore drilling projects. www.forcetechnology.com will give more info for you.

Simon Amallraja


 
 Reply 
 
Frank Lund
R & D,
United Kingdom, Joined Apr 2005, 222

Frank Lund

R & D,
United Kingdom,
Joined Apr 2005
222
01:36 Feb-27-2007
Re: MPI Underwater
----------- Start Original Message -----------
: Does anybody could give some knowledge of how to carried out UT and MPI for underwater, i means that the technique used and equipment used.
: thank you
------------ End Original Message ------------

NEWT International has an excellent lightweight system for underwater inspection, which has displaced MPI for defect detection and sizing. The system is very portable. It doesn't use a high voltage AC supply in the umbilical as it was designed to use only a single twisted pair in an umbilical, which can be on a ROV, in a diver's umbilical or a separate lightweight cable.

We would be happy to give you some references.



 
 Reply 
 

Product Spotlight

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window