where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

895 views
Technical Discussions
Roderic K Stanley
Roderic K Stanley
01:22 Aug-16-1999
COATING THICKNESS MEASUREMENT INSIDE COILED TUBING.N

We make carbon steel coiled tubing. Someone has sated he can coat it internally with a plastic layer 0.020 in thick. Does anyone have a device that can run 10,000 ft through coiled tubing on a spool and determine the coating thickness. It ought to be possible with eddy current stand-off sensors mounted in a 'pig" , with a lot of electronics to store the data.

Roderic K Stanley

Sr Research Scientist.


 
 Reply 
 
Leon Vandervalk
R & D
DeFelsko Corporation, USA, Joined Oct 1999, 3

Leon Vandervalk

R & D
DeFelsko Corporation,
USA,
Joined Oct 1999
3
00:16 Aug-20-1999
Re: COATING THICKNESS MEASUREMENT INSIDE COILED TUBING.N
We make handheld battery operated coating thickness gages that could easly be mounted on a pig. On board memory could easily support 10,000+ readings.


 
 Reply 
 
Leon Vandervalk
R & D
DeFelsko Corporation, USA, Joined Oct 1999, 3

Leon Vandervalk

R & D
DeFelsko Corporation,
USA,
Joined Oct 1999
3
00:23 Aug-20-1999
Re: COATING THICKNESS MEASUREMENT INSIDE COILED TUBING.N
We make handheld battery operated coating thickness gages that could easily be mounted on a pig. On board memory could easily support 10,000+ readings.


 
 Reply 
 
Richard D. Roberts
Engineering, Executive Managment
Quest Integrity Group, USA, Joined Nov 1998, 78

Richard D. Roberts

Engineering, Executive Managment
Quest Integrity Group,
USA,
Joined Nov 1998
78
07:53 Sep-07-1999
Re: COATING THICKNESS MEASUREMENT INSIDE COILED TUBING.N
Dear Mr. Roderic K Stanley,

QUEST Integrated, Inc. manafactures several types of Tube ID Inspection systems. One remote pigging system inparticular utilizes both ultasonics and laser. I think it is much too large for your tubing. Can you provide more detailed specifications on the tubing (ie Diameter, Thickness, Material, etc.)?

Regards,
Richard D. Roberts
QUEST Integrated, Inc.



 
 Reply 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window