where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

766 views
Technical Discussions
Joel Norman
NDT Inspector
Canada, Joined Jun 2008, 5

Joel Norman

NDT Inspector
Canada,
Joined Jun 2008
5
06:33 Feb-25-2007
PA Gap Dimensions

Can someone explain to me exactly what the gap dimension is for a phased array probe? I haven't seen it on any probe data sheets but I have heard a few different explantions. Does it relate to the pitch?

I need to know as it is a recording requirement of ASME Sec. V, Art. 4, Appendix 4 - Examination Record (a).

Thanks,

Joel Norman


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1303

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1303
01:00 Feb-25-2007
Re: PA Gap Dimensions
Joel:
The gap is just the space between the elements (i.e. the thickness of the saw that was used to slice the array). If you have a copy of the RD Tech "Introduction to Phased Array Ultrasonic Technology Applications" book, it is shown on page 107.
The Probe parameters such as these are essential variables so need to be itemised for a proper record of the equipment used.

Regards
Ed

----------- Start Original Message -----------
: Can someone explain to me exactly what the gap dimension is for a phased array probe? I haven't seen it on any probe data sheets but I have heard a few different explantions. Does it relate to the pitch?
: I need to know as it is a recording requirement of ASME Sec. V, Art. 4, Appendix 4 - Examination Record (a).
: Thanks,
: Joel Norman
------------ End Original Message ------------




 
 Reply 
 
Joel Norman
NDT Inspector
Canada, Joined Jun 2008, 5

Joel Norman

NDT Inspector
Canada,
Joined Jun 2008
5
03:55 Feb-26-2007
Re: PA Gap Dimensions
----------- Start Original Message -----------
: Joel:
: The gap is just the space between the elements (i.e. the thickness of the saw that was used to slice the array). If you have a copy of the RD Tech "Introduction to Phased Array Ultrasonic Technology Applications" book, it is shown on page 107.
: The Probe parameters such as these are essential variables so need to be itemised for a proper record of the equipment used.
: Regards
: Ed
:
: : Can someone explain to me exactly what the gap dimension is for a phased array probe? I haven't seen it on any probe data sheets but I have heard a few different explantions. Does it relate to the pitch?
: : I need to know as it is a recording requirement of ASME Sec. V, Art. 4, Appendix 4 - Examination Record (a).
: : Thanks,
: : Joel Norman
------------ End Original Message ------------

Thanks Ed.


 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

Micro CT

nanoVoxel series has nano-scale resolution upto 500nm by using high voltage X-ray source (from 80-
...
300 kV) with micro/nano focal spot and highly sensitive flat panel detectors and unique Optical coupling detector.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window