where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

796 views
Technical Discussions
Dave Cartwright
Director, Technical/R+D
Cygnus Instruments Ltd., United Kingdom, Joined Oct 1999, 3

Dave Cartwright

Director, Technical/R+D
Cygnus Instruments Ltd.,
United Kingdom,
Joined Oct 1999
3
01:27 Aug-03-1999
High temperature u/s transducer

We urgently need to source transducers (50+) for a permanent thickness monitoring application.

The devices must be capable of operating at 250C whilst bonded to the stainless steel piping of interest. The entirety will be lagged and left un-maintained or inspected for at least 12 months!

Centre frequency would be at least 3.5MHz but not higher than 5MHz, wideband, high resolution - capable of measuring down to 1.75mm or less ideally.

We need off the shelf product - not the predeicted result of research please!

Thanks


 
 Reply 
 
Dipl.-Ing. Martin Heinz
Dipl.-Ing. Martin Heinz
01:34 Aug-03-1999
Re: High temperature u/s transducer
: We urgently need to source transducers (50+) for a permanent thickness monitoring application.

: The devices must be capable of operating at 250C whilst bonded to the stainless steel piping of interest. The entirety will be lagged and left un-maintained or inspected for at least 12 months!

: Centre frequency would be at least 3.5MHz but not higher than 5MHz, wideband, high resolution - capable of measuring down to 1.75mm or less ideally.

: We need off the shelf product - not the predeicted result of research please!

: Thanks

Dear Mr. Cartwright,

please contact the companies ETALON (http://www.etaloninc.com) and ULTRAN (http://www.ultranlabs.com). Both companies manufacture high-temperature NDT-probes for testing at continuous temperatures of more than 300° C.

Best regards,

Dipl.-Ing. Martin Heinz.



 
 Reply 
 
Norm Taormina
Norm Taormina
02:37 Sep-08-1999
Re: High temperature u/s transducer
: : We urgently need to source transducers (50+) for a permanent thickness monitoring application.

: : The devices must be capable of operating at 250C whilst bonded to the stainless steel piping of interest. The entirety will be lagged and left un-maintained or inspected for at least 12 months!

: : Centre frequency would be at least 3.5MHz but not higher than 5MHz, wideband, high resolution - capable of measuring down to 1.75mm or less ideally.

: : We need off the shelf product - not the predeicted result of research please!

: : Thanks

: Dear Mr. Cartwright,

: please contact the companies ETALON (http://www.etaloninc.com) and ULTRAN (http://www.ultranlabs.com). Both companies manufacture high-temperature NDT-probes for testing at continuous temperatures of more than 300° C.

: Best regards,

: Dipl.-Ing. Martin Heinz.




 
 Reply 
 

Product Spotlight

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window