where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1137 views
Technical Discussions
Farshid Alizadeh
NDT Inspector, Eng. sales
Hitan Co Ltd, Iran, Joined Oct 1999, 5

Farshid Alizadeh

NDT Inspector, Eng. sales
Hitan Co Ltd,
Iran,
Joined Oct 1999
5
08:37 Jul-30-1999
urgent required one C-Scan UT System for purchasing.

U R G E N T

: Dear Friends,

: I am searching UT scanner suitable for c-scan testing of auto parts with common analog UT instrument and imaging software ?

: Thank you very much in advance.

: Regards.

: Farshid




 
 Reply 
 
Norm Woodward
Norm Woodward
02:31 Jul-30-1999
Re: urgent required one C-Scan UT System for purchasing.

: : I am searching UT scanner suitable for c-scan testing of auto parts with common analog UT instrument and imaging software ?


One unit I have admired from afar is Krautkramer/Hocking's ANDSCAN unit. It would use your own UT instrument, which I think you want, plus it has quite a bit of flexibility as to contours of the surface.

Boeing (formerly McDonnell-Douglas) has a MAUS system which may be considered, but it sort of assumes that you will be using its pulser/receiver, though it could be overridden if you wanted to use your own equipment.

Each has eddy current and bondtesting capabilities also.

Your local Krautkramer dealer can tell you about ANDSCAN; Ms Nancy Wood would love to talk to you about the MAUS at (314)234-9028.

BTW, if anyone is thinking about a portable C-scan unit, but not in a rush, they may be interested in buying or borrowing a report written by Sandia National Labs, back in 1994, called "Evaluation of Scanners for C-Scan Imaging in NDI of Aircraft - SAND94-0945." Though not up-to-date, it does do side-by-side comparisons of several systems still available today. It's sort of a "Consumer's Report" of C-Scan equipment.

It is available commercially from:
NTIC
US Dept of Commerce
5285 Port Royal Rd
Springfield VA 22161

Unfortunately, I can't find the price for it, but it could be worth whatever the cost, not to have to check every system available.

Norm



 
 Reply 
 
Norm Taormina
Norm Taormina
02:48 Sep-08-1999
Re: urgent required one C-Scan UT System for purchasing.

: : : I am searching UT scanner suitable for c-scan testing of auto parts with common analog UT instrument and imaging software ?

:
: One unit I have admired from afar is Krautkramer/Hocking's ANDSCAN unit. It would use your own UT instrument, which I think you want, plus it has quite a bit of flexibility as to contours of the surface.

: Boeing (formerly McDonnell-Douglas) has a MAUS system which may be considered, but it sort of assumes that you will be using its pulser/receiver, though it could be overridden if you wanted to use your own equipment.

: Each has eddy current and bondtesting capabilities also.

: Your local Krautkramer dealer can tell you about ANDSCAN; Ms Nancy Wood would love to talk to you about the MAUS at (314)234-9028.

: BTW, if anyone is thinking about a portable C-scan unit, but not in a rush, they may be interested in buying or borrowing a report written by Sandia National Labs, back in 1994, called "Evaluation of Scanners for C-Scan Imaging in NDI of Aircraft - SAND94-0945." Though not up-to-date, it does do side-by-side comparisons of several systems still available today. It's sort of a "Consumer's Report" of C-Scan equipment.

: It is available commercially from:
: NTIC
: US Dept of Commerce
: 5285 Port Royal Rd
: Springfield VA 22161

: Unfortunately, I can't find the price for it, but it could be worth whatever the cost, not to have to check every system available.

: Norm

: AEA Technology has an outstanding "C" scan ultrasonic imaging system that images "C","D", and "E" scans concurrently. E-mail me for info. if your interested.




 
 Reply 
 
Peter Simpson
Peter Simpson
09:41 Sep-08-1999
Re: urgent required one C-Scan UT System for purchasing.
If you want to evaluate ANDSCAN a system could be made available for rental from Ashtead Technology Ltd, tel +44 (0)1224 771888.


Regards


Peter Simpson
www.ashtead-technology.com

:
: : : : I am searching UT scanner suitable for c-scan testing of auto parts with common analog UT instrument and imaging software ?

: :
: : One unit I have admired from afar is Krautkramer/Hocking's ANDSCAN unit. It would use your own UT instrument, which I think you want, plus it has quite a bit of flexibility as to contours of the surface.

: : Boeing (formerly McDonnell-Douglas) has a MAUS system which may be considered, but it sort of assumes that you will be using its pulser/receiver, though it could be overridden if you wanted to use your own equipment.

: : Each has eddy current and bondtesting capabilities also.

: : Your local Krautkramer dealer can tell you about ANDSCAN; Ms Nancy Wood would love to talk to you about the MAUS at (314)234-9028.

: : BTW, if anyone is thinking about aportable C-scan unit, but not in a rush, they may be interested in buying or borrowing a report written by Sandia National Labs, back in 1994, called "Evaluation of Scanners for C-Scan Imaging in NDI of Aircraft - SAND94-0945." Though not up-to-date, it does do side-by-side comparisons of several systems still available today. It's sort of a "Consumer's Report" of C-Scan equipment.

: : It is available commercially from:
: : NTIC
: : US Dept of Commerce
: : 5285 Port Royal Rd
: : Springfield VA 22161

: : Unfortunately, I can't find the price for it, but it could be worth whatever the cost, not to have to check every system available.

: : Norm

: : AEA Technology has an outstanding "C" scan ultrasonic imaging system that images "C","D", and "E" scans concurrently. E-mail me for info. if your interested.




 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window