where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

554 views
Technical Discussions
jairo sanchez
jairo sanchez
05:37 Sep-20-1999
ardrox et equipment

we have an eddy current equipment from ARDROX company. rigth now the equiment is not working properly and we need the probe for non/ferritic alloys.

the company AEROTURBO is from Colombia, we work in the aeronautical field.

if any body nows the adress or the representative of this company ARDROX, for south america or in the USA?


    
 
 
Jamie Gauthier
Jamie Gauthier
06:26 May-26-2000
Re: ardrox et equipment
You can have any Ardrox equipment serviced by Gould-Bass in the USA. The web page is www.gould-bass.com.
Their Phone number is 909-623-6793.

We have our equipment calibrated there.


    
 
 
Agus Sunandar
Agus Sunandar
00:34 Jul-18-2000
Re: ardrox et equipment
: You can have any Ardrox equipment serviced by Gould-Bass in the USA. The web page is www.gould-bass.com.
: Their Phone number is 909-623-6793.

: We have our equipment calibrated there.




    
 
 

Product Spotlight

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window