where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1060 views
Technical Discussions
Ben Bradley
Ben Bradley
00:33 Mar-01-2007
Corrosion thickness measurement

I am currently researching ultrasound instruments to be used for thickness measurement of corroded steel plate. I was wondering if anyone can recommend any particular instruments that are good at this application? Robustness, ease of use, repeatability and reliability are all very important in this case.


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
04:45 Mar-01-2007
Re: Corrosion thickness measurement
There are many, many companies in that market, including mine. Here's a link to a detailed application note on the subject of ultrasonic corrosion gaging that includes links to data sheets on the various gages available in the Panametrics-NDT line from Olympus NDT.

----------- Start Original Message -----------
: I am currently researching ultrasound instruments to be used for thickness measurement of corroded steel plate. I was wondering if anyone can recommend any particular instruments that are good at this application? Robustness, ease of use, repeatability and reliability are all very important in this case.
------------ End Original Message ------------




 
 Reply 
 
Simon Amallraja
Simon Amallraja
09:03 Mar-06-2007
Re: Corrosion thickness measurement
----------- Start Original Message -----------
: I am currently researching ultrasound instruments to be used for thickness measurement of corroded steel plate. I was wondering if anyone can recommend any particular instruments that are good at this application? Robustness, ease of use, repeatability and reliability are all very important in this case.
------------ End Original Message ------------

If you are looking for point measurement, you can use Corrosion Gages. You can look into Panametrics, Sonatest, KK, Danatronics etc and many more.

If you are looking for continuous mapping with data verification, speed and analysis, manufacturer's like NDT Solutions, Force Technology will help you.

You need to give more details to recommend suitable products for your application.

D.Simon Amallraja.


 
 Reply 
 
AGUSTIN JIMENEZ
AGUSTIN JIMENEZ
06:00 Mar-07-2007
Re: Corrosion thickness measurement
I RECOMMEND THE DMS 2 B-SCAN WITH PROBE HT 450WT OR FH2E.
I HAVE USED IT EQUIPMENT MANY TIME IS VERY EFFECTIVE.

----------- Start Original Message -----------
: I am currently researching ultrasound instruments to be used for thickness measurement of corroded steel plate. I was wondering if anyone can recommend any particular instruments that are good at this application? Robustness, ease of use, repeatability and reliability are all very important in this case.
------------ End Original Message ------------




 
 Reply 
 
Phil Thayer
Phil Thayer
07:17 Mar-07-2007
Re: Corrosion thickness measurement
Please go to ndtautomation.com. We have released the Pocket UT, hand held A,B and C-Scan system. Will perform a B-scan for corrossion mapping. Weighs less then 2 pounds. Compatible with most all encoded scans and can even control 2 axis motorized scanners. Should be perfect for your application.

Phil Thayer
609-716-4051

----------- Start Original Message -----------
: I RECOMMEND THE DMS 2 B-SCAN WITH PROBE HT 450WT OR FH2E.
: I HAVE USED IT EQUIPMENT MANY TIME IS VERY EFFECTIVE.
: : I am currently researching ultrasound instruments to be used for thickness measurement of corroded steel plate. I was wondering if anyone can recommend any particular instruments that are good at this application? Robustness, ease of use, repeatability and reliability are all very important in this case.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window