where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1043 views
Technical Discussions
Lorenzo Digregorio
Consultant, AUT specialist
IMG Ultrasuoni Srl, Italy, Joined Apr 2007, 691

Lorenzo Digregorio

Consultant, AUT specialist
IMG Ultrasuoni Srl,
Italy,
Joined Apr 2007
691
00:44 Apr-04-2007
Code Case 2235 compliance

Somebody has developed a "videorecording" system able to record the GE PHASOR screeen in correlation with an encoder mounted on the PA probe. In other words, the encoder is used as a "trigger" for recording the screen display. They claim it is "CODE CASE 2235 COMPLIANT". What is the forum opinion?


 
 Reply 
 
Massimo Carminati , E-mail:
Massimo Carminati , E-mail:
06:24 Apr-16-2007
Re: Code Case 2235 compliance
I don't believe that when the ASME committee stated that "the ultrasonic examination shall be performed using a device employing automatic computer based data acquisition" included a "movie" of the instrument screen! In my opinion "data" are "digitized UT signals in unprocessed form" and not a VGA output!



 
 Reply 
 
RT. Jeyakumar , E-mail:
RT. Jeyakumar , E-mail:
04:45 Apr-19-2007
Re: Code Case 2235 compliance
Good day,

I dont think Phasor can give recorded Video presentation. It would be like this., recorded image of TOFD can be post processed for Interpretation in offline (after the test).

So, you can run the image of TOFD (D-Scan) along with A-scan. So it gives real time offline presentation.

With Warm Regards,

RT. Jeyakumar

----------- Start Original Message -----------
: Somebody has developed a "videorecording" system able to record the GE PHASOR screeen in correlation with an encoder mounted on the PA probe. In other words, the encoder is used as a "trigger" for recording the screen display. They claim it is "CODE CASE 2235 COMPLIANT". What is the forum opinion?
------------ End Original Message ------------




 
 Reply 
 
Massimo Carminati , E-mail:
Massimo Carminati , E-mail:
07:35 Apr-20-2007
Re: Code Case 2235 compliance
Does it really allow to perform TOFD inspection?


 
 Reply 
 
RT. Jeyakumar , E-mail:
RT. Jeyakumar , E-mail:
08:24 Apr-20-2007
Re: Code Case 2235 compliance
Good day,

I dont know. But you can check equipment's technical specification with BS 7706.

With Warm regards,

RT. Jeyakumar


-----
------ Start Original Message -----------
: Does it really allow to perform TOFD inspection?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window