where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1050 views
Technical Discussions
Lorenzo Digregorio
Consultant, AUT specialist
IMG Ultrasuoni Srl, Italy, Joined Apr 2007, 691

Lorenzo Digregorio

Consultant, AUT specialist
IMG Ultrasuoni Srl,
Italy,
Joined Apr 2007
691
00:44 Apr-04-2007
Code Case 2235 compliance

Somebody has developed a "videorecording" system able to record the GE PHASOR screeen in correlation with an encoder mounted on the PA probe. In other words, the encoder is used as a "trigger" for recording the screen display. They claim it is "CODE CASE 2235 COMPLIANT". What is the forum opinion?


 
 Reply 
 
Massimo Carminati , E-mail:
Massimo Carminati , E-mail:
06:24 Apr-16-2007
Re: Code Case 2235 compliance
I don't believe that when the ASME committee stated that "the ultrasonic examination shall be performed using a device employing automatic computer based data acquisition" included a "movie" of the instrument screen! In my opinion "data" are "digitized UT signals in unprocessed form" and not a VGA output!



 
 Reply 
 
RT. Jeyakumar , E-mail:
RT. Jeyakumar , E-mail:
04:45 Apr-19-2007
Re: Code Case 2235 compliance
Good day,

I dont think Phasor can give recorded Video presentation. It would be like this., recorded image of TOFD can be post processed for Interpretation in offline (after the test).

So, you can run the image of TOFD (D-Scan) along with A-scan. So it gives real time offline presentation.

With Warm Regards,

RT. Jeyakumar

----------- Start Original Message -----------
: Somebody has developed a "videorecording" system able to record the GE PHASOR screeen in correlation with an encoder mounted on the PA probe. In other words, the encoder is used as a "trigger" for recording the screen display. They claim it is "CODE CASE 2235 COMPLIANT". What is the forum opinion?
------------ End Original Message ------------




 
 Reply 
 
Massimo Carminati , E-mail:
Massimo Carminati , E-mail:
07:35 Apr-20-2007
Re: Code Case 2235 compliance
Does it really allow to perform TOFD inspection?


 
 Reply 
 
RT. Jeyakumar , E-mail:
RT. Jeyakumar , E-mail:
08:24 Apr-20-2007
Re: Code Case 2235 compliance
Good day,

I dont know. But you can check equipment's technical specification with BS 7706.

With Warm regards,

RT. Jeyakumar


-----
------ Start Original Message -----------
: Does it really allow to perform TOFD inspection?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

On Demand Webinar: Improve the Efficiency and Accuracy of Inspection Scanning

On-demand webinar on scanning technology that helps improve the efficiency and accuracy of ultrasoni
...
c inspections in oil and gas, aerospace, manufacturing and other industrial applications. The webinar features a scanning solution for multiple inspection environments, including flat and curved specimens, magnetic and nonmagnetic surfaces and raster scanning over long distances. View it today.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window