where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1002 views
Technical Discussions
Lorenzo Digregorio
Consultant, AUT specialist
IMG Ultrasuoni Srl, Italy, Joined Apr 2007, 691

Lorenzo Digregorio

Consultant, AUT specialist
IMG Ultrasuoni Srl,
Italy,
Joined Apr 2007
691
00:44 Apr-04-2007
Code Case 2235 compliance

Somebody has developed a "videorecording" system able to record the GE PHASOR screeen in correlation with an encoder mounted on the PA probe. In other words, the encoder is used as a "trigger" for recording the screen display. They claim it is "CODE CASE 2235 COMPLIANT". What is the forum opinion?


 
 Reply 
 
Massimo Carminati , E-mail:
Massimo Carminati , E-mail:
06:24 Apr-16-2007
Re: Code Case 2235 compliance
I don't believe that when the ASME committee stated that "the ultrasonic examination shall be performed using a device employing automatic computer based data acquisition" included a "movie" of the instrument screen! In my opinion "data" are "digitized UT signals in unprocessed form" and not a VGA output!



 
 Reply 
 
RT. Jeyakumar , E-mail:
RT. Jeyakumar , E-mail:
04:45 Apr-19-2007
Re: Code Case 2235 compliance
Good day,

I dont think Phasor can give recorded Video presentation. It would be like this., recorded image of TOFD can be post processed for Interpretation in offline (after the test).

So, you can run the image of TOFD (D-Scan) along with A-scan. So it gives real time offline presentation.

With Warm Regards,

RT. Jeyakumar

----------- Start Original Message -----------
: Somebody has developed a "videorecording" system able to record the GE PHASOR screeen in correlation with an encoder mounted on the PA probe. In other words, the encoder is used as a "trigger" for recording the screen display. They claim it is "CODE CASE 2235 COMPLIANT". What is the forum opinion?
------------ End Original Message ------------




 
 Reply 
 
Massimo Carminati , E-mail:
Massimo Carminati , E-mail:
07:35 Apr-20-2007
Re: Code Case 2235 compliance
Does it really allow to perform TOFD inspection?


 
 Reply 
 
RT. Jeyakumar , E-mail:
RT. Jeyakumar , E-mail:
08:24 Apr-20-2007
Re: Code Case 2235 compliance
Good day,

I dont know. But you can check equipment's technical specification with BS 7706.

With Warm regards,

RT. Jeyakumar


-----
------ Start Original Message -----------
: Does it really allow to perform TOFD inspection?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window