where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
774 views
Technical Discussions
Garrett
Garrett
03:53 May-30-2007
UT for steam traps

I'm looking into purchasing an ultrasonic testing device to test for failure in steam traps. Where should I look for more info? What manufacturers are recommended for such a device? thanks


 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
00:16 May-31-2007
Re: UT for steam traps
HI Garrett

We can supply this equipment.

Plesae check the relevant web page

www.sonatest.com/soundscan

Whereabouts are you in the world? I will have our local rep send you a proposal..
All the best

Joe Buckley
Sonatest Ltd.

----------- Start Original Message -----------
: I'm looking into purchasing an ultrasonic testing device to test for failure in steam traps. Where should I look for more info? What manufacturers are recommended for such a device? thanks
------------ End Original Message ------------




 
 Reply 
 
Garrett
Garrett
08:47 May-31-2007
Re: UT for steam traps
I'm based in New York City. I would be interested to learn more about the equipment you've mentioned


 
 Reply 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

On-Demand Webinar: Advanced Ultrasonic Techniques for HTHA Detection & Assessment

In the Oil and Gas industry, High Temperature Hydrogen Attack (HTHA) can occur in steels operating a
...
t high temperature, usually above 205°C (400°F). Early stages of HTHA are very difficult to detect. Join us for a webinar presented by Guy Maes, Zetec Sales Engineer Director. The webinar will demonstrate how advanced ultrasonic techniques are deployed for efficient and reliable HTHA inspections.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window