where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger NDT GmbH
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.
518 views
Technical Discussions
ken
ken
01:18 Jun-09-2007
resin content monitoring in prepregs

Hi all,

We develop industrial low energy X-ray method and apparatus for monitoring of resin content in prepregs during production. Can anybody give us his thoughts about this method or show us a link where a X-ray method is used at presence in prepregs manufacturing?

Any thoughts will be greatly appreciated

Sincerelly,
Dr. Nikitin




 
 Reply 
 
John Brunk
Engineering, NDT Level III
Self employed, part-time, USA, Joined Oct 1999, 162

John Brunk

Engineering, NDT Level III
Self employed, part-time,
USA,
Joined Oct 1999
162
00:33 Jun-10-2007
Re: resin content monitoring in prepregs
----------- Start Original Message -----------
: Hi all,
: We develop industrial low energy X-ray method and apparatus for monitoring of resin content in prepregs during production. Can anybody give us his thoughts about this method or show us a link where a X-ray method is used at presence in prepregs manufacturing?
: Any thoughts will be greatly appreciated
: Sincerelly,
: Dr. Nikitin
------------ End Original Message ------------
You should take a careful look at the attenuation coefficients of the materials involved. X-ray may not be the best method for distinguishing graphite from the resin. Looking for actual voids is a different matter. Air-transmission ultrasound would be worth consideration.

John Brunk


 
 Reply 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Content on Demand by Eddyfi Technologies

Finding yourself in front of a screen practicing safe social distancing instead of out in the fiel
...
d? At Eddyfi Technologies, we are doing our part in helping you be better prepared for what comes next. We introduce to you Eddyfi on Demand. Fill your schedule with webinars, how-to videos, informative technical papers and our NEW addition: Eddyfi Academy. There, you will have access to FREE online courses and obtain certificates of attendance once completed in order for you to include these e-learning sessions in your log of required training hours. Join us today. Stay safe, stay Beyond Current.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window