where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1400 views
Technical Discussions
Samoen
Consultant, -
NDT Wide, France, Joined Jun 2007, 4

Samoen

Consultant, -
NDT Wide,
France,
Joined Jun 2007
4
05:00 Jun-13-2007
remote leak/gas detection

Looking for laser equipment for remote leak/gas detection
Thanks


 
 Reply 
 
Simon Amallraja
Director
PET Aviation Systems P Ltd, India, Joined Jul 2003, 20

Simon Amallraja

Director
PET Aviation Systems P Ltd,
India,
Joined Jul 2003
20
09:05 Jun-13-2007
Re: remote leak/gas detection
----------- Start Original Message -----------
: Looking for laser equipment for remote leak/gas detection
: Thanks
------------ End Original Message ------------

Depends on the leak rate you are looking, you can use UT Gas Leak Detector - check with sonatest/soundscan or Helium Leak Detector - check with uson.com

Simon


 
 Reply 
 
portphillip
portphillip
08:12 Jan-21-2015
Re: remote leak/gas detection
In Reply to Samoen at 05:00 Jun-13-2007 (Opening).

hi... if you want to detect any other gas like poisonous gas,co2, etc you can use MiniRAE Lite portable gas detector.I am using this product and is working fine for me .

 
 Reply 
 
Jack Kleinfeld
Jack Kleinfeld
17:13 Jan-21-2015
Re: remote leak/gas detection
In Reply to Samoen at 05:00 Jun-13-2007 (Opening).

You specifically ask about laser equipment. I'm not aware of any laser equipment for remote detection, but there are thermal infrared systems that are tuned to identify leaks of various gases. They depend on the IR absorptivity of the gases, so not all gases are suited for detection this way. The systems are appropriate for remote sensing and detection, however. FLIR offers the GasFinder cameras for this. See http://www.flir.com/ogi/content/?id=66693
There are also monitoring systems that can be used, for example in a fixed location such as a stack. These depend on attenuation of a signal that is sent through the stack flow and reflected back to a sensor. Not sure if you'd consider these "laser".

 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window