where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1333 views
Technical Discussions
Philippe Rubbers
Engineering
SCM, South Africa, Joined Nov 1998, 22

Philippe Rubbers

Engineering
SCM,
South Africa,
Joined Nov 1998
22
08:28 Aug-11-1999
UT inspections of large castings and austenitic steel

What techniques are available to inspect (volumetric) coarse grain
material,such as castings and austenitic steels, with a thick cross
section? Examples where this material would be used is in the
primary loop of nuclear power stations, and in pipe work in the
petrochemical industry.

Thanks


 
 Reply 
 
jayesh.vanza
jayesh.vanza
07:53 Aug-11-1999
Re: UT inspections of large castings and austenitic steel
: What techniques are available to inspect (volumetric) coarse grain
: material,such as castings and austenitic steels, with a thick cross
: section? Examples where this material would be used is in the
: primary loop of nuclear power stations, and in pipe work in the
: petrochemical industry.

: Thanks




 
 Reply 
 
GAF
GAF
03:16 Aug-13-1999
Re: UT inspections of large castings and austenitic steel
: : What techniques are available to inspect (volumetric) coarse grain
: : material,such as castings and austenitic steels, with a thick cross
: : section? Examples where this material would be used is in the
: : primary loop of nuclear power stations, and in pipe work in the
: : petrochemical industry.

: : Thanks

Depends on the material and what type of inspection but in general Ultrasonic inspection of CSS components has been unreliable. Your best bet is a low freqency focused dual L wave 3/4 or 1 meg for crack detection



 
 Reply 
 
Norm Woodward
Norm Woodward
08:42 Aug-13-1999
Re: UT inspections of large castings and austenitic steel
: What techniques are available to inspect (volumetric) coarse grain
: material,such as castings and austenitic steels, with a thick cross
: section? Examples where this material would be used is in the
: primary loop of nuclear power stations, and in pipe work in the
: petrochemical industry.

I have no first hand experience with them, but Krautkramer, and a few others, were pushing "composite transducers" as a solution to inspecting noisy materials.

As I recall, this site had some on-line articles about them back in the fall of '96.

Hope this helps,

Norm


 
 Reply 
 
Russ Minkwitz
Russ Minkwitz
09:59 Aug-13-1999
Re: UT inspections of large castings and austenitic steel
: What techniques are available to inspect (volumetric) coarse grain
: material,such as castings and austenitic steels, with a thick cross
: section? Examples where this material would be used is in the
: primary loop of nuclear power stations, and in pipe work in the
: petrochemical industry.

Sir,

Dual element critically refracted longitudinal waves have been used for such applications for years. They are mentioned in IIW handbook on the examination of austenetic welds.

Further there are more detailed papers on dual element and tandem techniques published by RTD and Panametrics.

If you would like copies please provide you address and we will send more information.

Best Regards,
Russ Minkwitz
Manager, Transducer Sales





 
 Reply 
 
satish
satish
09:38 Oct-29-1999
Re: UT inspections of large castings and austenitic steel
: What techniques are available to inspect (volumetric) coarse grain
: material,such as castings and austenitic steels, with a thick cross
: section? Examples where this material would be used is in the
: primary loop of nuclear power stations, and in pipe work in the
: petrochemical industry.

: Thanks




 
 Reply 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

Portable Ground Penetrating Radar - Proceq GP8000

The Proceq GP8000 portable ground penetrating radar instrument is the beginning of a new era in ND
...
T. The outstanding, patented ultra- wideband technology combined with a compact wireless probe delivers unmatched industry performance. Proceq GP8000 is the world’s first large-scale inspection solution that utilizes Augmented Reality in industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window