where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

860 views
Technical Discussions
Sunny
Sunny
06:03 Jun-21-2007
Inspection of 0.100" O.D bar

Can experienced friend comment on how to inspect such a smaal O.D bar, for surface and internal defects. UT is not easy. ET for surface? Whats best?


 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 307

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
307
07:14 Jun-21-2007
Re: Inspection of 0.100" O.D bar
----------- Start Original Message -----------
: Can experienced friend comment on how to inspect such a smaal O.D bar, for surface and internal defects. UT is not easy. ET for surface? Whats best?
------------ End Original Message ------------

Hi Sunny,

Is the bar Ferromagnetic or not?

If it's not, then eddy currents should be OK provided you get the right frequency. Maybe around a few tens of KHz.
If it's Ferromagnetic, then a DC Flux Leakage may be ideal.

Is this a one-off test or for production? If it's one-off and Ferromagnetic, perhaps manual Magnetic Particle Inspection with DC should detect internal defects as well as surface, but you need to ensure your flux is in the right direction for the defects you want to detect.

Regards,

Godfrey Hands




 
 Reply 
 
Thomas Vogt
R & D, - -
Guided Ultrasonics Ltd, United Kingdom, Joined Apr 2007, 22

Thomas Vogt

R & D, - -
Guided Ultrasonics Ltd,
United Kingdom,
Joined Apr 2007
22
07:23 Jun-21-2007
Re: Inspection of 0.100" O.D bar
Hi Sunny

As usual, we need more information in order to give an appropriate answer.

What types and size of defects are you looking for? How long is the bar and what material is it?

UT is difficult, but not guided wave UT depending on the above.

Regards,
Tom

----------- Start Original Message -----------
: Can experienced friend comment on how to inspect such a smaal O.D bar, for surface and internal defects. UT is not easy. ET for surface? Whats best?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window