where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

861 views
Technical Discussions
Sunny
Sunny
06:03 Jun-21-2007
Inspection of 0.100" O.D bar

Can experienced friend comment on how to inspect such a smaal O.D bar, for surface and internal defects. UT is not easy. ET for surface? Whats best?


 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 307

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
307
07:14 Jun-21-2007
Re: Inspection of 0.100" O.D bar
----------- Start Original Message -----------
: Can experienced friend comment on how to inspect such a smaal O.D bar, for surface and internal defects. UT is not easy. ET for surface? Whats best?
------------ End Original Message ------------

Hi Sunny,

Is the bar Ferromagnetic or not?

If it's not, then eddy currents should be OK provided you get the right frequency. Maybe around a few tens of KHz.
If it's Ferromagnetic, then a DC Flux Leakage may be ideal.

Is this a one-off test or for production? If it's one-off and Ferromagnetic, perhaps manual Magnetic Particle Inspection with DC should detect internal defects as well as surface, but you need to ensure your flux is in the right direction for the defects you want to detect.

Regards,

Godfrey Hands




 
 Reply 
 
Thomas Vogt
R & D, - -
Guided Ultrasonics Ltd, United Kingdom, Joined Apr 2007, 22

Thomas Vogt

R & D, - -
Guided Ultrasonics Ltd,
United Kingdom,
Joined Apr 2007
22
07:23 Jun-21-2007
Re: Inspection of 0.100" O.D bar
Hi Sunny

As usual, we need more information in order to give an appropriate answer.

What types and size of defects are you looking for? How long is the bar and what material is it?

UT is difficult, but not guided wave UT depending on the above.

Regards,
Tom

----------- Start Original Message -----------
: Can experienced friend comment on how to inspect such a smaal O.D bar, for surface and internal defects. UT is not easy. ET for surface? Whats best?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window