where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

898 views
Technical Discussions
Nick Welland
Nick Welland
01:32 Jun-22-2007
EN Welding Quality Standard

Good Day everyone,

A client wishes to qualify welders to EN 287-1:2004.

What is the current EN version of ISO 5817:2003?

My searches have only shown EN 25817:1993 as "superseded".
Is it correct to inspect to the ISO, or have changes been made to adopt as an EN?

Regards
Nick


    
 
 
ovidiu
NDT Inspector, thermography
ISCIR, Romania, Joined Dec 2005, 16

ovidiu

NDT Inspector, thermography
ISCIR,
Romania,
Joined Dec 2005
16
07:18 Jun-22-2007
Re: EN Welding Quality Standard
EN ISO 5817:2003 is in use

-----------Start Original Message -----------
: Good Day everyone,
: A client wishes to qualify welders to EN 287-1:2004.
: What is the current EN version of ISO 5817:2003?
: My searches have only shown EN 25817:1993 as "superseded".
: Is it correct to inspect to the ISO, or have changes been made to adopt as an EN?
: Regards
: Nick
------------ End Original Message ------------




    
 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 176

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
176
08:12 Jun-22-2007
Re: EN Welding Quality Standard
reply:

The actual documents are:

EN 287-1:2004 + Amendment 2:2006.

EN 25718 is superseded by a single EN ISO standard:

EN ISO 5817:2003 + Corrigendum 2006

Best regards

Udo Schlengermann
GE Inspection Technologies GmbH, Huerth, Germany
Convener CEN/TC121/SC5/WG2 (UT of welds)


----------- Start Original Message -----------
: Good Day everyone,
: A client wishes to qualify welders to EN 287-1:2004.
: What is the current EN version of ISO 5817:2003?
: My searches have only shown EN 25817:1993 as "superseded".
: Is it correct to inspect to the ISO, or have changes been made to adopt as an EN?
: Regards
: Nick
------------ End Original Message ------------




    
 
 

Product Spotlight

TVC awarded UKAS accreditation

TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration
...
laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking.
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window