where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

496 views
Technical Discussions
Lee Bird
Lee Bird
05:58 Nov-04-1999
Simulation Software

Greetings,

I am trying to develop an angle beam procedure to test 6" nozzles
welded to a Pressure Vessel. These nozzles have reinforcement
saddles. The location is very remote. I would like to know if anyone knows of software available whereby I could experiment with different angles and techniques for testing before traveling to remote location?

Thanks
Lee Bird


 
 Reply 
 
Jacques Parent
Jacques Parent
08:22 Nov-04-1999
Re: Simulation Software
: Greetings,

: I am trying to develop an angle beam procedure to test 6" nozzles
: welded to a Pressure Vessel. These nozzles have reinforcement
: saddles. The location is very remote. I would like to know if anyone knows of software available whereby I could experiment with different angles and techniques for testing before traveling to remote location?

: Thanks
: Lee Bird

We are using a software called IMAGINE 3D. You can get more information at www.utex.com
tel. 905-828-1313
Good luck
jp




 
 Reply 
 
mahammd salehi
mahammd salehi
07:00 Dec-11-2000
Re: Simulation Software
: : Greetings,

: : I am trying to develop an angle beam procedure to test 6" nozzles
: : welded to a Pressure Vessel. These nozzles have reinforcement
: : saddles. The location is very remote. I would like to know if anyone knows of software available whereby I could experiment with different angles and techniques for testing before traveling to remote location?

: : Thanks
: : Lee Bird

: We are using a software called IMAGINE 3D. You can get more information at www.utex.com
: tel. 905-828-1313
: Good luck
: jp




 
 Reply 
 

Product Spotlight

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window