where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1957 views
Technical Discussions
Dinev
Dinev
03:57 Nov-12-1999
Message.

As with accuracy to measure of factor of absorption and speed of a sound in a liquid. For example milk.


    
 
 Reply 
 
Jean Paul van Cuyck
Director
A2MS, Applied Acoustics, Materials and Systems, France, Joined Nov 1998, 13

Jean Paul van Cuyck

Director
A2MS, Applied Acoustics, Materials and Systems,
France,
Joined Nov 1998
13
05:58 Nov-13-1999
Re: Message.
: As with accuracy to measure of factor of absorption and speed of a sound in a liquid. For example milk.

If I understand well, your request is the precision we
can expect for sound speed meausrement and sound attenuation.

This value is dependant of your experimental setup,
electronics performances, and dimension measurement accuracy.

usually 1/100, we can expect 1/1000 m/s accuracy in ultrasonics speed
measurement with higth precaution procedure.

The attenuation accuracy depend on the same parameters
and also frequency use. For materials with higth
attenuation You can't perform the soound propagation
on big length, so your accuracy is limited.

Can you precise your application, please

J.P. van Cuyck

A2MS, Applied Acoustics, Materials and Systems
"Le Grand Luminy",
Luminy Scientific Park
13 288 Marseilles Cedex
France
Tel +33 491 828 494
Fax +33 491 828 485


    
 
 Reply 
 
Dr. Amos Mizrach
Engineering, R&D
Institute of Agricultural Engineering - The Volcani Center, Israel, Joined Oct 1999, 3

Dr. Amos Mizrach

Engineering, R&D
Institute of Agricultural Engineering - The Volcani Center,
Israel,
Joined Oct 1999
3
09:28 Nov-14-1999
absoption and speed of sound in milk.
: As with accuracy to measure of factor of absorption and speed of a sound in a liquid. For example milk.

This subject is interesting for me (especially wave sound in milk).
I'll be glad to get further information about applications of ultrasound in sound measurements in MILK.
Is someone manufacturing such equipment?
Thanks


    
 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1268

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1268
08:44 Nov-14-1999
Re: absoption and speed of sound in milk.
An associate of mine, Dr. N.D.Patel, has made a system specifically for acoustic velocity and
attenuation measurements.
He has done measurement with milk and it can measure one drop of milk in 50 drops of water.
Important is that velocity is also function of temperature and thus we can use comparator
measurement and we should be able to measure very accurately. There is quite difference in 1%,
2 %, Homo and lactose free milk. The system can measure with 50 picosec accuracy.
Dr. Patel's email is fallon@netcom.ca

: : As with accuracy to measure of factor of absorption and speed of a sound in a liquid. For example milk.

: This subject is interesting for me (especially wave sound in milk).
: I'll be glad to get further information about applications of ultrasound in sound measurements in MILK.
: Is someone manufacturing such equipment?
: Thanks




    
 
 Reply 
 
Pim van Andel
Pim van Andel
00:09 Nov-15-1999
Re: absoption and speed of sound in milk.
: : As with accuracy to measure of factor of absorption and speed of a sound in a liquid. For example milk.

: This subject is interesting for me (especially wave sound in milk).
: I'll be glad to get further information about applications of ultrasound in sound measurements in MILK.
: Is someone manufacturing such equipment?
: Thanks

Take a look at www.rhosonics.nl
They have equipment and sensors for in-line measurements.
The ultrasonic sensor has a build in temperature sensor
that is realy needed for high accuracy concentration measurements with temperature compensation.



    
 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window