where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1120 views
Technical Discussions
kevin whinney
kevin whinney
07:59 Jun-28-2007
eddy current

Is it ok to do eddy current on pad eye fitted to decks

at this time we use MPI but removing the coating is becoming a problem with the client

He has said he has see eddy current used thought the coating
but when i have looked in to this there is test probs made for thought coating but to calibrate the eddy current tester you need to know the coating thickness

please if any one is doing inspection of pad eye using eddy current then any information would bee nice


    
 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 521

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
521
00:12 Jun-28-2007
Re: eddy current
Its not really a problem - the approach recommended in EN1711 is to use an absolute eddy current probe to measure the coating thickness and then calibrate accordingly. another approach nowadays would be to use a digital coating thickness gauge.

You only need to know the coating thickness to use enough gain to ensure you find the equivalent defects . absolute accuracy is not necessary.

Joe

---------- Start Original Message -----------
: Is it ok to do eddy current on pad eye fitted to decks
: at this time we use MPI but removing the coating is becoming a problem with the client
: He has said he has see eddy current used thought the coating
: but when i have looked in to this there is test probs made for thought coating but to calibrate the eddy current tester you need to know the coating thickness
: please if any one is doing inspection of pad eye using eddy current then any information would bee nice
------------ End Original Message ------------




    
 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 157

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
157
01:36 Jun-29-2007
Re: eddy current
Yes what Joe has said is all true but the coating thickness can vary over the inspection area so it would be better to be able to monitor the coating thickness during inspection and then adjust the sensitivity as required. A dual frequency EC inspection using a weldscan probe would do just that.
There was an interesting technical paper given at the Asia Pacific Conference of NDT in New Zealand last year on dual frequency EC inspection of coated welds which discussed this topic.
Also another helpful hint is to cover the inspection area with a thin clear plastic sheet, like OHP film, because the painted surface is generally very rough, anti-slip paint, and this will reduce wear on the weldscan probe. Plus you will also have a '1:1 drawing' of your inspection.
Hope this helps
Regards
Neil
----------- Start Original Message -----------
: Its not really a problem - the approach recommended in EN1711 is to use an absolute eddy current probe to measure the coating thickness and then calibrate accordingly. another approach nowadays would be to use a digital coating thickness gauge.
: You only need to know the coating thickness to use enough gain to ensure you find the equivalent defects . absolute accuracy is not necessary.
: Joe
: ---------- Start Original Message -----------
: : Is it ok to do eddy current on pad eye fitted to decks
: : at this time we use MPI but removing the coating is becoming a problem with the client
: : He has said he has see eddy current used thought the coating
: : but when i have looked in to this there is test probs made for thought coating but to calibrate the eddy current tester you need to know the coating thickness
: : please if any one is doing inspection of pad eye using eddy current then any information would bee nice
------------ End Original Message ------------




    
 
 Reply 
 
Steve Greenall
Steve Greenall
07:31 Jul-02-2007
Re: eddy current
Hi Kevin,

Our equipment is designed exactly for through coating inspections and has been utilised in this way for years. We have a lift off compensation which means you can inspect without having to worry about coating thickness or inputting guestimate coating thicknesses into the equipment(which are invariably wrong for the reasons Neil mentioned.)

Please have a look at our products here
http://www.lizard.co.uk/products/products.html
and feel free to email me with any questions

Steve

----------- Start Original Message -----------
: Is it ok to do eddy current on pad eye fitted to decks
: at this time we use MPI but removing the coating is becoming a problem with the client
: He has said he has see eddy current used thought the coating
: but when i have looked in to this there is test probs made for thought coating but to calibrate the eddy current tester you need to know the coating thickness
: please if any one is doing inspection of pad eye using eddy current then any information would bee nice
------------ End Original Message ------------




    
 
 Reply 
 

Product Spotlight

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window