where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2071 views
Technical Discussions
Dinev
Dinev
03:57 Nov-12-1999
Message.

As with accuracy to measure of factor of absorption and speed of a sound in a liquid. For example milk.


 
 Reply 
 
Jean Paul van Cuyck
Director
A2MS, Applied Acoustics, Materials and Systems, France, Joined Nov 1998, 13

Jean Paul van Cuyck

Director
A2MS, Applied Acoustics, Materials and Systems,
France,
Joined Nov 1998
13
05:58 Nov-13-1999
Re: Message.
: As with accuracy to measure of factor of absorption and speed of a sound in a liquid. For example milk.

If I understand well, your request is the precision we
can expect for sound speed meausrement and sound attenuation.

This value is dependant of your experimental setup,
electronics performances, and dimension measurement accuracy.

usually 1/100, we can expect 1/1000 m/s accuracy in ultrasonics speed
measurement with higth precaution procedure.

The attenuation accuracy depend on the same parameters
and also frequency use. For materials with higth
attenuation You can't perform the soound propagation
on big length, so your accuracy is limited.

Can you precise your application, please

J.P. van Cuyck

A2MS, Applied Acoustics, Materials and Systems
"Le Grand Luminy",
Luminy Scientific Park
13 288 Marseilles Cedex
France
Tel +33 491 828 494
Fax +33 491 828 485


 
 Reply 
 
Dr. Amos Mizrach
Engineering, R&D
Institute of Agricultural Engineering - The Volcani Center, Israel, Joined Oct 1999, 3

Dr. Amos Mizrach

Engineering, R&D
Institute of Agricultural Engineering - The Volcani Center,
Israel,
Joined Oct 1999
3
09:28 Nov-14-1999
absoption and speed of sound in milk.
: As with accuracy to measure of factor of absorption and speed of a sound in a liquid. For example milk.

This subject is interesting for me (especially wave sound in milk).
I'll be glad to get further information about applications of ultrasound in sound measurements in MILK.
Is someone manufacturing such equipment?
Thanks


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1300

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1300
08:44 Nov-14-1999
Re: absoption and speed of sound in milk.
An associate of mine, Dr. N.D.Patel, has made a system specifically for acoustic velocity and
attenuation measurements.
He has done measurement with milk and it can measure one drop of milk in 50 drops of water.
Important is that velocity is also function of temperature and thus we can use comparator
measurement and we should be able to measure very accurately. There is quite difference in 1%,
2 %, Homo and lactose free milk. The system can measure with 50 picosec accuracy.
Dr. Patel's email is fallon@netcom.ca

: : As with accuracy to measure of factor of absorption and speed of a sound in a liquid. For example milk.

: This subject is interesting for me (especially wave sound in milk).
: I'll be glad to get further information about applications of ultrasound in sound measurements in MILK.
: Is someone manufacturing such equipment?
: Thanks




 
 Reply 
 
Pim van Andel
Pim van Andel
00:09 Nov-15-1999
Re: absoption and speed of sound in milk.
: : As with accuracy to measure of factor of absorption and speed of a sound in a liquid. For example milk.

: This subject is interesting for me (especially wave sound in milk).
: I'll be glad to get further information about applications of ultrasound in sound measurements in MILK.
: Is someone manufacturing such equipment?
: Thanks

Take a look at www.rhosonics.nl
They have equipment and sensors for in-line measurements.
The ultrasonic sensor has a build in temperature sensor
that is realy needed for high accuracy concentration measurements with temperature compensation.



 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window