where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
896 views
Technical Discussions
AMIRI
Consultant, NDT/QC/WELD INSPECTION
Iran, Joined Nov 2005, 20

AMIRI

Consultant, NDT/QC/WELD INSPECTION
Iran,
Joined Nov 2005
20
06:20 Jul-02-2007
Temperature Effect on UT

Dear Friends,
What is effects of high temperature on sound velocity in matrials .for example in thickness measuring of c.steels on 500 oC what is the changing of actual thickness which detected by UT?
Regards


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
06:41 Jul-02-2007
Re: Temperature Effect on UT
Sound velocity in all engineering materials decreases with temperature. In common steel alloys, the velocity decreases approximately 1% per 55 degrees Celcius. Thus, if you do not compensate for this change, your thickness readings at elevated temperature will be too high.

We have an application note on the subject of high temperature testing that you may find useful. Please see the link below.



 
 Reply 
 
chris s
Consultant, qc manager
USA, Joined Apr 2007, 9

chris s

Consultant, qc manager
USA,
Joined Apr 2007
9
08:10 Jul-02-2007
Re: Temperature Effect on UT
----------- Start Original Message -----------
: Dear Friends,
: What is effects of high temperature on sound velocity in matrials .for example in thickness measuring of c.steels on 500 oC what is the changing of actual thickness which detected by UT?
: Regards
------------ End Original Message ------------

you can elevate the temperature of your calibration block to 500oC and UT thickness readings will be accurate



 
 Reply 
 

Product Spotlight

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window