where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

TWI
TWI is a world leading research and technology organisation established in 1946. From bases in the UK, USA, China, Malaysia, Middle East, India a ...
1832 views
Technical Discussions
Mike
Mike
07:40 Jul-09-2007
Intrinsically Safe UT Methods

Currently, I am searching the market for a UT technique that is intrinsically safe to UK zone 1 or USA DIV 0 - 1. It appears the NDT manufacturing market does not offer such solution. Can anyone offer information to support an important market requirement.


 
 Reply 
 
Sunil Ramchandran
Sunil Ramchandran
09:12 Jul-09-2007
Re: Intrinsically Safe UT Methods
We have had clients with the same request/requirement.

My research failed to find any UT instrument manufacturers who make such an intrinsically safe machine.

If I recall correctly, either Panametrics or KB had made one for a few years, but the cost was prohibitive and the unit did not sell very well. Therefore, it was discontinued.

I would be interested to know if anyone has more information on this topic.

Great post, Mike.

Thanks.


 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
01:25 Jul-09-2007
Re: Intrinsically Safe UT Methods
Hi,

The only IS rated instrument I have run across is a D-meter from Cygnus instruments. Doesn't do shearwave, not very good for specialized corrosion applications due to it's single crystal design.

http://www.cygnus-instruments.com/launch.htm

Cygnus 1 IS

Cheers,

David Hermanutz

----------- Start Original Message -----------
: We have had clients with the same request/requirement.
: My research failed to find any UT instrument manufacturers who make such an intrinsically safe machine.
: If I recall correctly, either Panametrics or KB had made one for a few years, but the cost was prohibitive and the unit did not sell very well. Therefore, it was discontinued.
: I would be interested to know if anyone has more information on this topic.
: Great post, Mike.
: Thanks.
------------ End Original Message ------------




 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 158

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
158
01:33 Jul-10-2007
Re: Intrinsically Safe UT Methods
Hello Mike,
There is a Krautkramer brand ultrasonic flaw detector, the USM 23ex that is classed intrinsically safe to EN 50014 & 50020. See the link below for more info. If you have any further questions please do not to hesitate your local GE IT Krautkramer ultrasonics distributor.
Regards

Neil Burleigh
----------- Start Original Message -----------
: Currently, I am searching the market for a UT technique that is intrinsically safe to UK zone 1 or USA DIV 0 - 1. It appears the NDT manufacturing market does not offer such solution. Can anyone offer information to support an important market requirement.
------------ End Original Message ------------




 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 158

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
158
01:35 Jul-10-2007
Re: Intrinsically Safe UT Methods
----------- Start Original Message -----------
: Hello Mike,
: There is a Krautkramer brand ultrasonic flaw detector, the USM 23ex that is classed intrinsically safe to EN 50014 & 50020. See the link below for more info. If you have any further questions please do not to hesitate your local GE IT Krautkramer ultrasonics distributor.
: Regards
: Neil Burleigh
PS I am not sure if the link went with the post so I will include it in the body of the text.
http://www.geinspectiontechnologies.com/download/products/ut/fd/GEIT-20004-p-GB_usm23ex.pdf
: : Currently, I am searching the market for a UT technique that is intrinsically safe to UK zone 1 or USA DIV 0 - 1. It appears the NDT manufacturing market does not offer such solution. Can anyone offer information to support an important market requirement.
------------ End Original Message ------------




 
 Reply 
 
Joe
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 526

Joe

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
526
02:58 Jul-10-2007
Re: Intrinsically Safe UT Methods
The problem is not the Flaw detector as such, but the fact that customers are very inconsiderate and want to connect probes to it. This raises issues of sparking when disconnecting probes, cable damage etc.

The Cygnus IS thickness gauge is the only 'standard instrument' I'm aware of - This is relatively simple because the application uses a single probe - It doesn't need to be disconnectable.

KK used to make an explosion proof Flaw Detector the USM 23ex - Not sure if it is still available. as far as I know (I'm sure I'll be corrected if wrong) it had some limitations of low pulser voltage and limited probe options to maintain IS approval. But it was the only one around so gave you options you wouldn't have otherwise.

We (Sonatest) looked at producing one some years ago, but the technical issues, cost of certification, limited market and inherent limitations made us decide against it. It would be nice if we could produce an IS Flaw Detector with the same performance as a standard one, but its not an option, so generally we find operators prefer to live with the requirement for hot-work permits or whatever.

Good luck
Joe

----------- Start Original Message -----------
: Currently, I am searching the market for a UT technique that is intrinsically safe to UK zone 1 or USA DIV 0 - 1. It appears the NDT manufacturing market does not offer such solution. Can anyone offer information to support an important market requirement.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window