where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1399 views
Technical Discussions
Shreefal Mehta
Shreefal Mehta
03:16 Nov-20-1999
Monitoring/Testing of fatigue in metals??

Could you please help me find current techniques (ultrasound; laboratory or field-use technique) used to monitor/test metals under conditions of repetitive use to determine risk of fatigue failure?

Thanks
Shreefal Mehta, Ph.D.
shreefal.mehta@email.swmed.edu


 
 Reply 
 
Liviu Singher
R & D,
Technion, Israel, Joined Nov 1998, 11

Liviu Singher

R & D,
Technion,
Israel,
Joined Nov 1998
11
02:41 Nov-21-1999
Re: Monitoring/Testing of fatigue in metals??



 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 307

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
307
08:49 Nov-22-1999
Re: Monitoring/Testing of fatigue in metals??
: Could you please help me find current techniques (ultrasound; laboratory or field-use technique) used to monitor/test metals under conditions of repetitive use to determine risk of fatigue failure?

: Thanks
: Shreefal Mehta, Ph.D.
: shreefal.mehta@email.swmed.edu

Hi,
I ave been working with the "Resonant Fingerprint" method of condition monitoring for high value individually identifiable components.
In this method, the Resonant Fingerprint (either in the acoustic or ultrasonic range) is recorded when the component or structure is new or in known good condition, and again at regular periods or when the component has been subjected to a traumatic stress. Changes in the fingerprint signify changes in the structural integrity of the component.

Contact me for more details, or see Insight August 1988, pages 500 to 503.
Phone +44 24 7632 0812
Fax +44 24 7632 0813
email Godfrey@hands-ndt.co.uk
Godfrey Hands




 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 307

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
307
08:49 Nov-22-1999
Re: Monitoring/Testing of fatigue in metals??
: Could you please help me find current techniques (ultrasound; laboratory or field-use technique) used to monitor/test metals under conditions of repetitive use to determine risk of fatigue failure?

: Thanks
: Shreefal Mehta, Ph.D.
: shreefal.mehta@email.swmed.edu

Hi,
I have been working with the "Resonant Fingerprint" method of condition monitoring for high value individually identifiable components.
In this method, the Resonant Fingerprint (either in the acoustic or ultrasonic range) is recorded when the component or structure is new or in known good condition, and again at regular periods or when the component has been subjected to a traumatic stress. Changes in the fingerprint signify changes in the structural integrity of the component.

Contact me for more details, or see Insight August 1988, pages 500 to 503.
Phone +44 24 7632 0812
Fax +44 24 7632 0813
email Godfrey@hands-ndt.co.uk
Godfrey Hands




 
 Reply 
 
Jens Forker
Jens Forker
01:32 Dec-20-1999
Re: Monitoring/Testing of fatigue in metals??
: Could you please help me find current techniques (ultrasound; laboratory or field-use technique) used to monitor/test metals under conditions of repetitive use to determine risk of fatigue failure?

: Thanks
: Shreefal Mehta, Ph.D.
: shreefal.mehta@email.swmed.edu

Acoustic Emission testing (passive listening/detection to acoustic waves emitted when sudden material changes, e.g. crack growth, take place) is a method which can help. You can easily achieve integral monitoring of your sample and get online information.

for further information see our homepage www.vallen.de or contact me directly.
Jens Forker



 
 Reply 
 
sdf
sdf
07:44 Dec-01-2000
Re: Monitoring/Testing of fatigue in metals??
: : Could you please help me find current techniques (ultrasound; laboratory or field-use technique) used to monitor/test metals under conditions of repetitive use to determine risk of fatigue failure?

: : Thanks
: : Shreefal Mehta, Ph.D.
: : shreefal.mehta@email.swmed.edu

: Hi,
: I have been working with the "Resonant Fingerprint" method of condition monitoring for high value individually identifiable components.
: In this method, the Resonant Fingerprint (either in the acoustic or ultrasonic range) is recorded when the component or structure is new or in known good condition, and again at regular periods or when the component has been subjected to a traumatic stress. Changes in the fingerprint signify changes in the structural integrity of the component.

: Contact me for more details, or see Insight August 1988, pages 500 to 503.
: Phone +44 24 7632 0812
: Fax +44 24 7632 0813
: email Godfrey@hands-ndt.co.uk
: Godfrey Hands




 
 Reply 
 
H. N. Singh
H. N. Singh
01:49 Aug-12-2002
Re: Monitoring/Testing of fatigue in metals??
COuld u tell any method for evaluating fatigue life valuation using NDT method
: Thanks
: H N SIngh.
: hemnarain@rediffmail.com





 
 Reply 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window