where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1401 views
Technical Discussions
Shreefal Mehta
Shreefal Mehta
03:16 Nov-20-1999
Monitoring/Testing of fatigue in metals??

Could you please help me find current techniques (ultrasound; laboratory or field-use technique) used to monitor/test metals under conditions of repetitive use to determine risk of fatigue failure?

Thanks
Shreefal Mehta, Ph.D.
shreefal.mehta@email.swmed.edu


 
 Reply 
 
Liviu Singher
R & D,
Technion, Israel, Joined Nov 1998, 11

Liviu Singher

R & D,
Technion,
Israel,
Joined Nov 1998
11
02:41 Nov-21-1999
Re: Monitoring/Testing of fatigue in metals??



 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 307

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
307
08:49 Nov-22-1999
Re: Monitoring/Testing of fatigue in metals??
: Could you please help me find current techniques (ultrasound; laboratory or field-use technique) used to monitor/test metals under conditions of repetitive use to determine risk of fatigue failure?

: Thanks
: Shreefal Mehta, Ph.D.
: shreefal.mehta@email.swmed.edu

Hi,
I ave been working with the "Resonant Fingerprint" method of condition monitoring for high value individually identifiable components.
In this method, the Resonant Fingerprint (either in the acoustic or ultrasonic range) is recorded when the component or structure is new or in known good condition, and again at regular periods or when the component has been subjected to a traumatic stress. Changes in the fingerprint signify changes in the structural integrity of the component.

Contact me for more details, or see Insight August 1988, pages 500 to 503.
Phone +44 24 7632 0812
Fax +44 24 7632 0813
email Godfrey@hands-ndt.co.uk
Godfrey Hands




 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 307

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
307
08:49 Nov-22-1999
Re: Monitoring/Testing of fatigue in metals??
: Could you please help me find current techniques (ultrasound; laboratory or field-use technique) used to monitor/test metals under conditions of repetitive use to determine risk of fatigue failure?

: Thanks
: Shreefal Mehta, Ph.D.
: shreefal.mehta@email.swmed.edu

Hi,
I have been working with the "Resonant Fingerprint" method of condition monitoring for high value individually identifiable components.
In this method, the Resonant Fingerprint (either in the acoustic or ultrasonic range) is recorded when the component or structure is new or in known good condition, and again at regular periods or when the component has been subjected to a traumatic stress. Changes in the fingerprint signify changes in the structural integrity of the component.

Contact me for more details, or see Insight August 1988, pages 500 to 503.
Phone +44 24 7632 0812
Fax +44 24 7632 0813
email Godfrey@hands-ndt.co.uk
Godfrey Hands




 
 Reply 
 
Jens Forker
Jens Forker
01:32 Dec-20-1999
Re: Monitoring/Testing of fatigue in metals??
: Could you please help me find current techniques (ultrasound; laboratory or field-use technique) used to monitor/test metals under conditions of repetitive use to determine risk of fatigue failure?

: Thanks
: Shreefal Mehta, Ph.D.
: shreefal.mehta@email.swmed.edu

Acoustic Emission testing (passive listening/detection to acoustic waves emitted when sudden material changes, e.g. crack growth, take place) is a method which can help. You can easily achieve integral monitoring of your sample and get online information.

for further information see our homepage www.vallen.de or contact me directly.
Jens Forker



 
 Reply 
 
sdf
sdf
07:44 Dec-01-2000
Re: Monitoring/Testing of fatigue in metals??
: : Could you please help me find current techniques (ultrasound; laboratory or field-use technique) used to monitor/test metals under conditions of repetitive use to determine risk of fatigue failure?

: : Thanks
: : Shreefal Mehta, Ph.D.
: : shreefal.mehta@email.swmed.edu

: Hi,
: I have been working with the "Resonant Fingerprint" method of condition monitoring for high value individually identifiable components.
: In this method, the Resonant Fingerprint (either in the acoustic or ultrasonic range) is recorded when the component or structure is new or in known good condition, and again at regular periods or when the component has been subjected to a traumatic stress. Changes in the fingerprint signify changes in the structural integrity of the component.

: Contact me for more details, or see Insight August 1988, pages 500 to 503.
: Phone +44 24 7632 0812
: Fax +44 24 7632 0813
: email Godfrey@hands-ndt.co.uk
: Godfrey Hands




 
 Reply 
 
H. N. Singh
H. N. Singh
01:49 Aug-12-2002
Re: Monitoring/Testing of fatigue in metals??
COuld u tell any method for evaluating fatigue life valuation using NDT method
: Thanks
: H N SIngh.
: hemnarain@rediffmail.com





 
 Reply 
 

Product Spotlight

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window