where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1364 views
Technical Discussions
Roberto Lantero
Roberto Lantero
02:24 Aug-21-2007
NDT of multi-layered composite structure

Hi,

where can I find training informations about NDT techniques of multi-layered composite structures (pitch-catch sweep, resonance, MIA....)?

I have read the bondmaster user manual and the staveley website, but it made little help to me....

Thank you very much

Roberto Lantero
Genova
Italy


 
 Reply 
 
Meindert Anderson
Director
Olympus, USA, Joined Dec 1999, 5

Meindert Anderson

Director
Olympus,
USA,
Joined Dec 1999
5
04:12 Aug-21-2007
Re: NDT of multi-layered composite structure
Roberto,

You can find more information about the BondMaster on the Olympus NDT site at the following link: http://www.olympusndt.com/en/ndt-application/87-id.209715271.html. I will also try to get you in contact with the product management of the BondMaster for details on training.

Meindert Anderson
Olympus NDT

----------- Start Original Message -----------
: Hi,
: where can I find training informations about NDT techniques of multi-layered composite structures (pitch-catch sweep, resonance, MIA....)?
: I have read the bondmaster user manual and the staveley website, but it made little help to me....
: Thank you very much
: Roberto Lantero
: Genova
: Italy
------------ End Original Message ------------




 
 Reply 
 
Simon Amallraja
Director
PET Aviation Systems P Ltd, India, Joined Jul 2003, 20

Simon Amallraja

Director
PET Aviation Systems P Ltd,
India,
Joined Jul 2003
20
09:04 Aug-26-2007
Re: NDT of multi-layered composite structure
----------- Start Original Message -----------
: Hi,
: where can I find training informations about NDT techniques of multi-layered composite structures (pitch-catch sweep, resonance, MIA....)?
: I have read the bondmaster user manual and the staveley website, but it made little help to me....
: Thank you very much
: Roberto Lantero
: Genova
: Italy
------------ End Original Message ------------

MIZ 21SR from ZETEC produced some excellent inspection results in Aerospace Components in India. Contact Zetec and you will difinitely get good results from 21SR model.

Good Luck.

Simon Amallraja.


 
 Reply 
 

Product Spotlight

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

VOGT Ultrasonics awarded innovation champion

Let go of the old and try something new. VOGT convinced the jury in the 27th round of the TOP 100
...
innovation competition. Our team is very pleased to officially belong to the TOP 100 in Germany!
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window