where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

951 views
Technical Discussions
Gabriel Teodorescu
Gabriel Teodorescu
01:43 Sep-11-2007
EMAT wanted!

Dear Friednds,

For NDT purposes, we plan to use the EMAT principle. Could you please let us know if your company is able to provide a system as specified below?
The aim of the EMAT NDT system is to measure the thickness of tube’s wall. The tube is made from plain low carbon steel. The thickness of the tube’s wall will be 2.5…8 mm.
The measurement will be performed from the outer side of the tube.
We beg you for the recommendation of one couple instrument + transducer for the above task. The system should have also the following abilities:
1 – The outer diameter of the measured tube will be 60 mm or less;
2- The thickness to be measured will be 2.5 …8 mm.
3 – The rate of readings will be as fast as possible, but at least 20 readings pro second.
4 - The data shall be accessible in real time to an USB connector on the instrument.
5 – It will be a plus the possibility of the instrument to communicate measured data instantly via a Blue Tooth or WLAN system.
6 – The instrument’s weight should be maximum 3 Kg.
7 - The instrument will present the measurement result in a classical way on a liquid crystals or other type of screen.
8 – The instrument is intended to be used in the USA. So, it will comply with pertinent American standards and settlements.
Do you have such a system in your program? Do you need to do some adaptation to meet our needs?
Additionally, please give us some figures about the price to expect and the delivery time.
Sincerely yours,

Gabriel Teodorescu,
ALSTOM Inspection Robotics AG



 
 Reply 
 
Mark Potter
R & D
Sonemat Ltd., United Kingdom, Joined Sep 2007, 7

Mark Potter

R & D
Sonemat Ltd.,
United Kingdom,
Joined Sep 2007
7
03:28 Sep-11-2007
Re: EMAT wanted!
Dear Gabriel,

Sonemat provides an EMAT with a small battery powered adaptor box which allows it to then be used with a conventional flaw detector, which would be suitable for your application.

We could also develop a custom system if you want.

Yours sincerely,

Mark Potter.


 
 Reply 
 
Massimo Gori
R & D,
CESI, Italy, Joined Mar 2006, 3

Massimo Gori

R & D,
CESI,
Italy,
Joined Mar 2006
3
09:44 Dec-02-2007
Re: EMAT wanted!
Dear Gabriel
our company has much experience in development of EMAT technology and applications, if you are interested I can provide more information, general or tailored to specific need.
Regards,
Massimo Gori
CESI
Milan - Italy

----------- Start Original Message -----------
: Dear Friednds,
: For NDT purposes, we plan to use the EMAT principle. Could you please let us know if your company is able to provide a system as specified below?
: The aim of the EMAT NDT system is to measure the thickness of tube’s wall. The tube is made from plain low carbon steel. The thickness of the tube’s wall will be 2.5…8 mm.
: The measurement will be performed from the outer side of the tube.
: We beg you for the recommendation of one couple instrument + transducer for the above task. The system should have also the following abilities:
: 1 – The outer diameter of the measured tube will be 60 mm or less;
: 2- The thickness to be measured will be 2.5 …8 mm.
: 3 – The rate of readingswill be as fast as possible, but at least 20 readings pro second.
: 4 - The data shall be accessible in real time to an USB connector on the instrument.
: 5 – It will be a plus the possibility of the instrument to communicate measured data instantly via a Blue Tooth or WLAN system.
: 6 – The instrument’s weight should be maximum 3 Kg.
: 7 - The instrument will present the measurement result in a classical way on a liquid crystals or other type of screen.
: 8 – The instrument is intended to be used in the USA. So, it will comply with pertinent American standards and settlements.
: Do you have such a system in your program? Do you need to do some adaptation to meet our needs?
: Additionally, please give us some figures about the price to expect and the delivery time.
: Sincerely yours,
: Gabriel Teodorescu,
: ALSTOM Inspection Robotics AG
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

On Demand Webinar: Improve the Efficiency and Accuracy of Inspection Scanning

On-demand webinar on scanning technology that helps improve the efficiency and accuracy of ultrasoni
...
c inspections in oil and gas, aerospace, manufacturing and other industrial applications. The webinar features a scanning solution for multiple inspection environments, including flat and curved specimens, magnetic and nonmagnetic surfaces and raster scanning over long distances. View it today.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)

Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
...
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window