where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

950 views
Technical Discussions
Gabriel Teodorescu
Gabriel Teodorescu
01:43 Sep-11-2007
EMAT wanted!

Dear Friednds,

For NDT purposes, we plan to use the EMAT principle. Could you please let us know if your company is able to provide a system as specified below?
The aim of the EMAT NDT system is to measure the thickness of tube’s wall. The tube is made from plain low carbon steel. The thickness of the tube’s wall will be 2.5…8 mm.
The measurement will be performed from the outer side of the tube.
We beg you for the recommendation of one couple instrument + transducer for the above task. The system should have also the following abilities:
1 – The outer diameter of the measured tube will be 60 mm or less;
2- The thickness to be measured will be 2.5 …8 mm.
3 – The rate of readings will be as fast as possible, but at least 20 readings pro second.
4 - The data shall be accessible in real time to an USB connector on the instrument.
5 – It will be a plus the possibility of the instrument to communicate measured data instantly via a Blue Tooth or WLAN system.
6 – The instrument’s weight should be maximum 3 Kg.
7 - The instrument will present the measurement result in a classical way on a liquid crystals or other type of screen.
8 – The instrument is intended to be used in the USA. So, it will comply with pertinent American standards and settlements.
Do you have such a system in your program? Do you need to do some adaptation to meet our needs?
Additionally, please give us some figures about the price to expect and the delivery time.
Sincerely yours,

Gabriel Teodorescu,
ALSTOM Inspection Robotics AG



 
 Reply 
 
Mark Potter
R & D
Sonemat Ltd., United Kingdom, Joined Sep 2007, 7

Mark Potter

R & D
Sonemat Ltd.,
United Kingdom,
Joined Sep 2007
7
03:28 Sep-11-2007
Re: EMAT wanted!
Dear Gabriel,

Sonemat provides an EMAT with a small battery powered adaptor box which allows it to then be used with a conventional flaw detector, which would be suitable for your application.

We could also develop a custom system if you want.

Yours sincerely,

Mark Potter.


 
 Reply 
 
Massimo Gori
R & D,
CESI, Italy, Joined Mar 2006, 3

Massimo Gori

R & D,
CESI,
Italy,
Joined Mar 2006
3
09:44 Dec-02-2007
Re: EMAT wanted!
Dear Gabriel
our company has much experience in development of EMAT technology and applications, if you are interested I can provide more information, general or tailored to specific need.
Regards,
Massimo Gori
CESI
Milan - Italy

----------- Start Original Message -----------
: Dear Friednds,
: For NDT purposes, we plan to use the EMAT principle. Could you please let us know if your company is able to provide a system as specified below?
: The aim of the EMAT NDT system is to measure the thickness of tube’s wall. The tube is made from plain low carbon steel. The thickness of the tube’s wall will be 2.5…8 mm.
: The measurement will be performed from the outer side of the tube.
: We beg you for the recommendation of one couple instrument + transducer for the above task. The system should have also the following abilities:
: 1 – The outer diameter of the measured tube will be 60 mm or less;
: 2- The thickness to be measured will be 2.5 …8 mm.
: 3 – The rate of readingswill be as fast as possible, but at least 20 readings pro second.
: 4 - The data shall be accessible in real time to an USB connector on the instrument.
: 5 – It will be a plus the possibility of the instrument to communicate measured data instantly via a Blue Tooth or WLAN system.
: 6 – The instrument’s weight should be maximum 3 Kg.
: 7 - The instrument will present the measurement result in a classical way on a liquid crystals or other type of screen.
: 8 – The instrument is intended to be used in the USA. So, it will comply with pertinent American standards and settlements.
: Do you have such a system in your program? Do you need to do some adaptation to meet our needs?
: Additionally, please give us some figures about the price to expect and the delivery time.
: Sincerely yours,
: Gabriel Teodorescu,
: ALSTOM Inspection Robotics AG
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window