where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1266 views
Technical Discussions
Paulo
Paulo
06:44 Sep-14-2007
Phased Array for Stainless Stell welds

Hello people!!!
Does anybody had already tried to do stainless stell weld inspection with phased array??Have any procedure available?
Thank you!

Paulo


 
 Reply 
 
Michael Moles †2014 *1948
, Joined ,
08:26 Sep-14-2007
Re: Phased Array for Stainless Stell welds
----------- Start Original Message -----------
: Hello people!!!
: Does anybody had already tried to do stainless stell weld inspection with phased array??Have any procedure available?
: Thank you!
: Paulo
------------ End Original Message ------------

Paulo:
Lot's of companies have inspected stainless steels with phased arrays, and procedures may be available from the right people. if you are looking for contacts, please contact me directly by e-mail. You should also give some specifications, e.g. type of stainless, thickness, expected defects etc.
Yours,
Michael



 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1303

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1303
08:29 Sep-14-2007
Re: Phased Array for Stainless Stell welds
Paulo:
whether the ultrasound is generated by a single element or a phased array probe the issues for "ultrasonic" inspection for austenitic materials remain the same.

You will still need to assess what the best frequency and wave mode (compression or shear) will be to achieve the results you are trying for. Phased arrays may provide interesting and useful options for beam angle, Tandem techniques and TRL methods but they are still subject to the same issues of scatter and absorption as any mechanical wave pulse.
Ed


----------- Start Original Message -----------
: Hello people!!!
: Does anybody had already tried to do stainless stell weld inspection with phased array??Have any procedure available?
: Thank you!
: Paulo
------------ End Original Message ------------




 
 Reply 
 
John Brunk
Engineering, NDT Level III
Self employed, part-time, USA, Joined Oct 1999, 162

John Brunk

Engineering, NDT Level III
Self employed, part-time,
USA,
Joined Oct 1999
162
09:11 Sep-14-2007
Re: Phased Array for Stainless Stell welds
----------- Start Original Message -----------
: Hello people!!!
: Does anybody had already tried to do stainless stell weld inspection with phased array??Have any procedure available?
: Thank you!
: Paulo
------------ End Original Message ------------

Some of the conditions that can make ultrasonic evaluation of austenitic stainless steel welds so difficult would not be helped by phased array. Large variations in velcoity and attenuation with changes in direction would cause the phased array to behave quite differently from what would be predicted in more uniform materials. In welds made from one side with one procedure, then back-gouged and the back side done with another procedure, there can be huge differences in acustic properties and a large reflection from the interface. I have sometimes used test specimens with macroetched surfaces and side-driled holes in several locations to painfully sort out an effective technique for manual inspection with several probes. It would be much less difficult to develop a phased array technique in a production environment if it were possible to start working on the inspection as the welding procedures were being developed..



 
 Reply 
 

Product Spotlight

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window