where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

KARL DEUTSCH
INSTRUMENTS AND SYSTEMS FOR NON-DESTRUCTIVE TESTING OF MATERIALS
1098 views
Technical Discussions
Rodney
Rodney
03:01 Oct-04-2007
Leak Test

Hello!! My name is Rodney and I work for a railcar repair facility in the US. Just recently we were told that we would have to develop a sensitivity and reliability for our Leak Test Procedure. We have done countless hours of research to see what exactly we have to do to fulfill this requirement, and so have been unsuccessful. Can anyone help or point me in the right direction?


 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 526

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
526
08:04 Oct-04-2007
Re: Leak Test
Rodney

I'm sure some of us can help, but leak testing is a varied field.

can you advise:

What are you testing for leaks -e.g. Bodies, Doors/windows, pneumatic systems etc?

What method(s) are you using? e.g. Ultrasonic, Gas detection, pressure drop, bubbles, smoke?

Where has the requirement com from - is it a specific requirement, or simply "how can you show that you are doing what you say you are?"

All the best
Joe


----------- Start Original Message -----------
: Hello!! My name is Rodney and I work for a railcar repair facility in the US. Just recently we were told that we would have to develop a sensitivity and reliability for our Leak Test Procedure. We have done countless hours of research to see what exactly we have to do to fulfill this requirement, and so have been unsuccessful. Can anyone help or point me in the right direction?
------------ End Original Message ------------




 
 Reply 
 
Rodney
Rodney
04:00 Oct-05-2007
Re: Leak Test
We are testing tank cars using the bubble leak method. From my understanding, the only requirement is to simply show that we are doing what we say we are, but I am unsure what sensitivity and reliability actually are. I really appreciate any help that you can provide. Thanks!!!!!!!




 
 Reply 
 
parham
Consultant,
Padideh Sazan Iranian azma, Iran, Joined Sep 2014, 9

parham

Consultant,
Padideh Sazan Iranian azma,
Iran,
Joined Sep 2014
9
16:23 Apr-08-2018
Re: Leak Test
In Reply to Rodney at 04:00 Oct-05-2007 .

dear sir
as you work by BLT your sensitivity is 10^-4 as which standard that you use you can chose which method is the best for you and how much leak is accept
and how much time is need for you
in the leak testing time is important cause and also experience
if you let me much more information i can help you beter

 
 Reply 
 
Simon Amallraja
Simon Amallraja
07:34 Apr-10-2018
Re: Leak Test
In Reply to Rodney at 03:01 Oct-04-2007 (Opening).

You can do the test with Ultrasonic (Airborne) Leak Tester - which is available in the market. 1x10-6 std cc per second can be detected using the above.

You can contact UE Systems - they have different models and also SDT System. Sonatest too had a small one.

 
 Reply 
 
parham mirfallah
Consultant,
Padideh Sazan Iranian azma, Iran, Joined Sep 2014, 9

parham mirfallah

Consultant,
Padideh Sazan Iranian azma,
Iran,
Joined Sep 2014
9
15:19 Oct-14-2018
Re: Leak Test
In Reply to Rodney at 03:01 Oct-04-2007 (Opening).

Dear Rodney
As you know leak testing has many factor that is must be chek and the alertness of oprator is very important .
Some time your pressur is not enough and somtime your subject is clear but the important part is personnels patience.
By this you must do your job again acording to your procedure in the best condition .
If it is not worked you must change your procedure .in leak testing we have 12 method of testing that specialist must chose the best one that has no waste money and time.
I can help you if you let me more information
Spm.ndt.l3@gmail.com

 
 Reply 
 
parham mirfallah
Consultant,
Padideh Sazan Iranian azma, Iran, Joined Sep 2014, 9

parham mirfallah

Consultant,
Padideh Sazan Iranian azma,
Iran,
Joined Sep 2014
9
14:37 Jun-20-2019
Re: Leak Test
In Reply to Rodney at 03:01 Oct-04-2007 (Opening).

Dear Rodney
As you say the blt is your choice to do this test...
Assume you need this range of sensivity ..
You must know that this kind of testing need to available tuch to surface of your testing area and contact with it ... you can also use ultrasound for airbron testing in this rage ... as you beter know leak testing has various way according to sensivity and applaying way ...
Bythe way you can have my all knowledj whit no charge(free).
Best regard
Parham

 
 Reply 
 

Product Spotlight

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

MIZ®-21C: Truly Affordable Eddy Current Handheld with Surface Array Capability

Introducing MIZ-21C, the first truly affordable handheld eddy current instrument with surface array
...
capabilities. MIZ-21C can deliver fast, accurate inspections in demanding NDT applications including aerospace, oil and gas, manufacturing, and power generation. The surface array solution can reduce inspection time by up to 95% compared to traditional handheld pencil probes. The ergonomic design, long battery life, and intuitive touchscreen mean you can inspect more areas faster than ever without fatigue.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window