where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

529 views
Technical Discussions
Dale Thorpe
Dale Thorpe
01:11 Sep-08-1999
NDT of Fine Wire

AMS is a contract NDT service company to the automotive safety industry, specifically high volume ultrasonic examination of Airbag canister and inflators. We are currently involved in an R&D program for one of our clients that has brought to us a most unusual problem, at least for us.

The problem is brittle fracture of wire in their ignitors. The wire, or more correctly Bridgewire is used in pyro-technic devices and ordinace explosives. The brigewire is 98% platinum and 2% tungsten. The diameter is 0.00075" (in). Each spool contains an average of 7,000ft and as many as thirty spools are being consumed daily.

Wire that has failed will have a lower tensile <170,000 and low elongation <6%.

I would be interested in knowing if any one on this thread has had any experience with this type of problem?

Dale Thorpe
President
AMS (602)442-1899
dale@ndt-inspection.com


 
 Reply 
 
PL Sorenson
PL Sorenson
04:00 Sep-09-1999
Re: NDT of Fine Wire
: AMS is a contract NDT service company to the automotive safety industry, specifically high volume ultrasonic examination of Airbag canister and inflators. We are currently involved in an R&D program for one of our clients that has brought to us a most unusual problem, at least for us.

: The problem is brittle fracture of wire in their ignitors. The wire, or more correctly Bridgewire is used in pyro-technic devices and ordinace explosives. The brigewire is 98% platinum and 2% tungsten. The diameter is 0.00075" (in). Each spool contains an average of 7,000ft and as many as thirty spools are being consumed daily.

: Wire that has failed will have a lower tensile <170,000 and low elongation <6%.

: I would be interested in knowing if any one on this thread has had any experience with this type of problem?

: Dale Thorpe
: President
: AMS (602)442-1899
: dale@ndt-inspection.com

You might want to contact Sandia's Explosive Technology Group. See http://www.sandia.gov/explosive/labs.htm
It appears they have sufficient expertise in this area to be able to help.

Pete Sorenson



 
 Reply 
 
Mark Davis
Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama, USA, Joined Mar 2000, 85

Mark Davis

Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama,
USA,
Joined Mar 2000
85
00:39 Dec-02-1999
Re: NDT of Fine Wire
Dear Dale,

This looks like a digital radiography solution. One you could radiograph the product with film and then digitally enhance the film to look for the defect.

Or just shoot the parts on a digital plate and then enhance the images to look. We can also use geometric enlargement to images the wires.

Sincerely,

J. Mark Davis

My number is


 
 Reply 
 

Product Spotlight

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window